Applications | ||
For counting pulses on the fly, such as: Encoder on various kinds of servo motor; Proximity sensor/detector with relative motion | ||
Application specific for inspection trigger on rotary or linear production line | ||
X-Y Table linear Scale F/B | Pulse signal receiver /display | |
Features | ||
PCI plug and play function with card ID for 16 identical cards | ||
High noise immunity with magnetic / photo-coupler isolation | ||
Supports DIN rail mounted wiring board | 32-bit timer based on 1us time base | |
8 photo isolated digital input | 8 photo isolated digital output | |
Software debounce for digital input | Software programmable I/O polarity | |
Interrupt from IN00 ~ IN07 | 32-bit counter | |
16MHz max. Quadrature input rate | Quadrature, pulse / direction and up / down counting | |
Programmable multiple rate at X1, X2, X4 | Software debounce for input signals | |
Multiple counter reset(homing) modes | Differential or single-end input signal | |
Station to station distance : 16-bit | Station to station FIFO : 7(max) | |
Programmable duration for Compare output | Interrupt on compare equal | |
Specifications (With Matched Wiring Board) | ||
Main Card -- Counter | ||
Number of axes : 1 | ||
Input : 5 magnetic isolation(A, B, Z, CLEAR, HOME input), TTL level | ||
Output : 8 differential position offset compare out | ||
Maximum quadrature input frequency : 16MHz @X4 | ||
Encoder Type : Single-end or differential(with ADP3101 DIN wiring board) | ||
Input software debounce : 512K, 1M, 2M, 4M, 8M,10M,16M (programmable) | ||
Input multiple rate : X1, X2, X4 programmable(quadrature signal only) | ||
Counter Mode : (QUADRATURE),(CLOCK/DIRECTION),(UP CLOCK/ DOWN CLOCK) | ||
Counter length : 32-bit | Position offset : 16-bit | |
Under inspection device FIFO : 7 (Station to station) | Allowable station : 1 ~ 8(max) | |
Trigger out pulse width : 16-bit @1us | Sample clock frequency : 198MHz | |
PCI data width : 32-bit | ||
Main Card -- Digital I/O | ||
Input : 8 photo-coupler isolated | ON state : 2.8Vdc(max) 4.5mA(min) | |
OFF state : 8Vdc(min) 3mA(max) | ||
Switching speed : 10KHz max.(limit by photo coupler speed and debounce filter) | ||
Software debounce : 100Hz, 200Hz, 1KHZ,. No debounce(programmable) | ||
Interrupt at IN00 ~ IN07 | Output : 8 photo-coupler isolated | |
Output range : Open collector 0 ~ 45Vdc(on card) | Output rating : (With ADP3101 DIN wiring board) | |
Sink current : 500mA(peak) per channel(on card) | 3A @250Vac, 30Vdc(Relay) | |
Switching speed : 20KHz(max)(MOS out only) | 1A @24Vdc(PMOS) | |
2A @240Vac(SSR) | ||
Main Card -- Timer | ||
Timer time base : 1us | Timer / counter length : 32-bit | |
Main Card -- General | ||
Card ID : 4-bit, 16 position | Insulation resistance : 1000M Ohm(min) at 1000Vdc | |
Connector : one 20-pin SCSI II centronic female connector | ||
two 20-pin flat cable connector | ||
Isolation voltage : 2500Vac 1Min | Storage temperature : -20 to +80 degree C | |
Operation temperature : 0 to +70 degree C | Operation humidity : 5~95% RH, non-condensing | |
Dimensions : 130(W)*102(H) mm, 5.2(W)*4.1(H) in | ||
DIN rail mounted wiring board | ||
ADP3101DIN DIN RAIL MOUNTED WIRING BOARD | ||
Power Requirement : 24Vdc ± 4Vdc | Single end / differential signal : jumper select | |
Connector : 20-pin SCSI II centronic cable to connect main and wiring board | ||
On board build-in s.p.s. : +5Vdc 500mA(max) | ||
Dimension : 86(W)*103(L)*45(H)mm, 3.4(W)*4.1(L)*1.8(H)in | ||
ADP9201DIN DIN rail mounted wiring board | ||
Power Requirement : 24Vdc ± 4Vdc | ||
Input : 8 with LED indicator | ||
Output : ADP9201DIN(R) : 8 Relay(3A @250Vac, 3A @30Vdc) with LED indicator | ||
ADP9201DIN(N) : 8 NMOS(Sink 1A @48Vdc) with LED indicator | ||
ADP9201DIN(P) : 8 PMOS(Source 1A @24Vdc) with LED indicator | ||
ADP9201DIN(S) : 8 SSR(2A @240Vac) with LED indicator | ||
Connector : One 20-pin male flat cable connector | ||
Operation temperature : 0 to 70 degree C | Operation humidity : 5~95% RH, non-condensing | |
Dimension : ADP9201DIN(R)/(N)/(P) : 86(W)*103(L)*45(H) mm, 3.4(W)*4.1(L)*1.8(H) in | ||
ADP9201DIN(S) : 86(W)*103(L)*50(H) mm, 3.4(W)*4.1(L)*2.0(H) in | ||
JS51053 20PM DIN rail dummy wiring board | ||
Dimension : 86(W)*79(L)*52(H) mm, 3.4(W)*3.2(L)*2.1(H) in | ||
JS51050 25PM DIN rail dummy wiring board | ||
Connection cable : D type 25P cable to connect main and wiring board | ||
Dimension : 86(W)*79(L)*52(H) mm, 3.4(W)*3.2(L)*2.1(H) in |
Download | |||||||
Driver, DLL, Demo and Example Program | Manual | Catalog | |||||
WinXP/7(32bit) | Win7(64bit) | Win10(32bit) | Win10(64bit) | Hardware Software | Main Card Wiring Board | ||
Driver | Driver |
|
Ordering Information | ||
PRODUCT | DESCRIPTIONS | |
1. | LSI3188 | Magnetic isolated one-axis Quadrature Encoder Counter Card with position offset compare function(up to 16MHz x4 quadrature input) |
2. | ADP3101DIN | DIN rail mounted wiring board matched LSI3101/3101A/3181/3188, quadrature counter related function for JF1 |
3. | M262020150 | 20-pin SCSI II centronic cable 1.5M for JF1 |
4. | M262020300 | 20-pin SCSI II centronic cable 3.0M for JF1 |
5. | JS51053 | DIN rail dummy wiring board for general digital I/O, Transistor out for ADP9201_JM1 |
6. | ADP9201DIN(R) | DIN rail mounted wiring board with 16 I/O LED indicators and Relay output for 8 DI, 8 DO for ADP9201_JM1 |
7. | ADP9201DIN(N) | DIN rail mounted wiring board with 16 I/O LED indicators and NMOS output for 8 DI, 8 DO for ADP9201_JM1 |
8. | ADP9201DIN(P) | DIN rail mounted wiring board with 16 I/O LED indicators and PMOS output for 8 DI, 8 DO for ADP9201_JM1 |
9. | ADP9201DIN(S) | DIN rail mounted wiring board with 16 I/O LED indicators and SSR output for 8 DI, 8 DO for ADP9201_JM1 |
10. | M23207 | 20-pin flat cable 1.5M for ADP9201_JM1 |
11. | M23209 | 20-pin flat cable 3.0M for ADP9201_JM1 |
12. | JS51050 | DIN rail mounted dummy wiring board(D type 25P male to terminals) for JM1 (pulse handler interface) |
13. | M270325X4 | D type 25P male-female cable 1.5M for SM23415 |
14. | M270325X4S | D type 25P male-female cable 1.5M, shielding for SM23415 |
15. | M270325X0 | D type 25P male-female cable 3.0M for SM23415 |
16. | M270325X0S | D type 25P male-female cable 3.0M, shielding for SM23415 |
17. | SM23415* | Extension kit for JM1 (bracket and flat cable for 25P female D type connector) |