计数器LSI3188

 For counting pulses on the fly, such as: Encoder on various kinds of servo motor; Proximity sensor/detector with relative motion

 Application specific for inspection trigger on rotary or linear production line

 X-Y Table linear Scale F/B

 Pulse signal receiver /display

Features

 PCI plug and play function with card ID for 16 identical cards

 High noise immunity with magnetic / photo-coupler isolation

 Supports DIN rail mounted wiring board

 32-bit timer based on 1us time base

 8 photo isolated digital input

 8 photo isolated digital output

 Software debounce for digital input

 Software programmable I/O polarity

 Interrupt from IN00 ~ IN07

 32-bit counter

 16MHz max. Quadrature input rate

 Quadrature, pulse / direction and up / down counting

 Programmable multiple rate at X1, X2, X4

 Software debounce for input signals

 Multiple counter reset(homing) modes

 Differential or single-end input signal

 Station to station distance : 16-bit

 Station to station FIFO : 7(max)

 Programmable duration for Compare output

 Interrupt on compare equal

Specifications (With Matched Wiring Board)

Main Card -- Counter

 Number of axes : 1

 Input : 5 magnetic isolation(A, B, Z, CLEAR, HOME input), TTL level

 Output : 8 differential position offset compare out

 Maximum quadrature input frequency : 16MHz @X4

 Encoder Type : Single-end or differential(with ADP3101 DIN wiring board)

 Input software debounce : 512K, 1M, 2M, 4M, 8M,10M,16M (programmable)

 Input multiple rate : X1, X2, X4 programmable(quadrature signal only)

 Counter Mode : (QUADRATURE)，(CLOCK/DIRECTION)，(UP CLOCK/ DOWN CLOCK)

 Counter length : 32-bit

 Position offset : 16-bit

  Under inspection device FIFO : 7 (Station to station)

 Allowable station : 1 ~ 8(max)

 Trigger out pulse width : 16-bit @1us

 Sample clock frequency : 198MHz

 PCI data width : 32-bit

Main Card -- Digital I/O

 Input : 8 photo-coupler isolated

 ON state : 2.8Vdc(max) 4.5mA(min)

 OFF state : 8Vdc(min) 3mA(max)

 Switching speed : 10KHz max.(limit by photo coupler speed and debounce filter)

 Software debounce : 100Hz, 200Hz, 1KHZ,. No debounce(programmable)

 Interrupt at IN00 ~ IN07

 Output : 8 photo-coupler isolated

 Output range : Open collector 0 ~ 45Vdc(on card)

 Output rating : (With ADP3101 DIN wiring board)

 Sink current : 500mA(peak) per channel(on card)

                              3A @250Vac, 30Vdc(Relay)

 Switching speed : 20KHz(max)(MOS out only)

                              1A @24Vdc(PMOS)

                              2A @240Vac(SSR)

Main Card -- Timer

 Timer time base : 1us

 Timer / counter length : 32-bit

Main Card -- General

 Card ID : 4-bit, 16 position

 Insulation resistance : 1000M Ohm(min) at 1000Vdc

 Connector : one 20-pin SCSI II centronic female connector

                         two 20-pin flat cable connector

 Isolation voltage : 2500Vac 1Min

 Storage temperature : -20 to +80 degree C

 Operation temperature : 0 to +70 degree C

 Operation humidity : 5~95% RH, non-condensing

 Dimensions : 130(W)*102(H) mm, 5.2(W)*4.1(H) in

DIN rail mounted wiring board

ADP3101DIN DIN RAIL MOUNTED WIRING BOARD

 Power Requirement : 24Vdc ± 4Vdc

 Single end / differential signal : jumper select

 Connector : 20-pin SCSI II centronic cable to connect main and wiring board

 On board build-in s.p.s. : +5Vdc 500mA(max)

 Dimension : 86(W)*103(L)*45(H)mm, 3.4(W)*4.1(L)*1.8(H)in

ADP9201DIN  DIN rail mounted wiring board

 Power Requirement : 24Vdc ± 4Vdc

 Input : 8 with LED indicator

 Output : ADP9201DIN(R) : 8 Relay(3A @250Vac, 3A @30Vdc) with LED indicator

                   ADP9201DIN(N) : 8 NMOS(Sink 1A @48Vdc) with LED indicator

                   ADP9201DIN(P) : 8 PMOS(Source 1A @24Vdc) with LED indicator

                   ADP9201DIN(S) : 8 SSR(2A @240Vac) with LED indicator 

 Connector : One 20-pin male flat cable connector

 Operation temperature : 0 to 70 degree C

 Operation humidity : 5~95% RH, non-condensing

 Dimension : ADP9201DIN(R)/(N)/(P) : 86(W)*103(L)*45(H) mm, 3.4(W)*4.1(L)*1.8(H) in

                         ADP9201DIN(S) : 86(W)*103(L)*50(H) mm, 3.4(W)*4.1(L)*2.0(H) in

JS51053 20PM DIN rail dummy wiring board

 Dimension : 86(W)*79(L)*52(H) mm, 3.4(W)*3.2(L)*2.1(H) in

JS51050 25PM DIN rail dummy wiring board

 Connection cable : D type 25P cable to connect main and wiring board

 Dimension : 86(W)*79(L)*52(H) mm, 3.4(W)*3.2(L)*2.1(H) in

 Driver, DLL, Demo and Example Program

Manual

Catalog

WinXP/7(32bit)

Win7(64bit)

Win10(32bit)

Win10(64bit)

 Hardware

 Software

 Main Card

 Wiring Board

 Driver

 Driver

PRODUCT

DESCRIPTIONS

 1.

LSI3188

Magnetic isolated one-axis Quadrature Encoder Counter Card with position offset compare function(up to 16MHz x4 quadrature input)

 2.

ADP3101DIN

DIN rail mounted wiring board matched LSI3101/3101A/3181/3188, quadrature counter related function for JF1

 3.

M262020150

20-pin SCSI II centronic cable 1.5M for JF1

 4.

M262020300

20-pin SCSI II centronic cable 3.0M for JF1

 5.

JS51053

DIN rail dummy wiring board for general digital I/O, Transistor out for ADP9201_JM1

 6.

ADP9201DIN(R)

DIN rail mounted wiring board with 16 I/O LED indicators and Relay output for 8 DI, 8 DO for ADP9201_JM1

 7.

ADP9201DIN(N)

DIN rail mounted wiring board with 16 I/O LED indicators and NMOS output for 8 DI, 8 DO for ADP9201_JM1

 8.

ADP9201DIN(P)

DIN rail mounted wiring board with 16 I/O LED indicators and PMOS output for 8 DI, 8 DO for ADP9201_JM1

 9.

ADP9201DIN(S)

DIN rail mounted wiring board with 16 I/O LED indicators and SSR output for 8 DI, 8 DO for ADP9201_JM1

 10.

M23207

20-pin flat cable 1.5M for ADP9201_JM1

 11.

M23209

20-pin flat cable 3.0M for ADP9201_JM1

 12.

JS51050

DIN rail mounted dummy wiring board(D type 25P male to terminals) for JM1 (pulse handler interface)

 13.

M270325X4

D type 25P male-female cable 1.5M for SM23415

 14.

M270325X4S

D type 25P male-female cable 1.5M, shielding for SM23415

 15.

M270325X0

D type 25P male-female cable 3.0M for SM23415

 16.

M270325X0S

D type 25P male-female cable 3.0M, shielding for SM23415

 17.

SM23415*

Extension kit for JM1 (bracket and flat cable for 25P female D type connector)