Main Card | Wiring Board | Combined Product |
Applications | |
Event counting | |
Frequency counter | |
Pulse signal receiver /display | |
Linear Scale / encoder F/B | |
CCD Image Capture Trigger on the fly | |
Features | |
PCIe plug and play function with card ID for 16 identical cards | |
High noise immunity with magnetic / photo-coupler isolation | |
Supports DIN rail mounted wiring board | |
32-bit timer based on 1us time base | |
8 photo isolated digital input | |
8 photo isolated digital output | |
Software debounce for digital input | |
Software programmable I/O polarity | |
Interrupt from IN00 ~ IN07 | |
32-bit counter | |
16MHz max. Quadrature input rate | |
Quadrature, pulse / direction and up / down counting | |
Programmable multiple rate at X1, X2, X4 | |
Software debounce for input signals | |
Multiple counter reset(homing) modes | |
Differential or single-end input signal | |
Compare mode : single, auto increment and FIFO compare mode | |
Output gated and segment mask off | |
Programmable duration for Compare output | |
Interrupt on compare equal, FIFO near end | |
Specifications (With Matched Wiring Board) | |
Main Card -- Counter | |
Number of axes : 1 | |
Input : 5 magnetic isolation(A, B, Z, CLEAR, HOME input), TTL level | |
Output : 1 magnetic isolation(compare out), TTL level | |
Maximum quadrature input frequency : 16MHz @ x1, x2, x4 | |
Encoder Type : Single-end or differential(with ADP3101/ADP3101D DIN wiring board) | |
Input software debounce : 512K, 1M, 2M, 4M, 8M, 10M,16M (programmable) | |
Input multiple rate : X1, X2, X4 programmable(quadrature signal only) | |
Counter length : 32-bit | |
Counter Mode : (QUADRATURE), (CLOCK/DIRECTION), (UP CLOCK/ DOWN CLOCK) | |
Compare Mode : Single compare | |
Auto-Increment compare | |
FIFO compare | |
Sample clock frequency : 33MHz | |
FIFO depth : 1023 | |
Compare out one shot duration : 1 ~ 65535us | |
Main Card -- Digital I/O | |
Input : 8 photo-coupler isolated | |
ON state : 2.8Vdc(max) 4.5mA(min) | |
OFF state : 8Vdc(min) 3mA(max) | |
Switching speed : 10KHz max.(limit by photo coupler speed and debounce filter) | |
Software debounce : 100Hz, 200Hz, 1KHZ,. No debounce(programmable) | |
Interrupt : at IN00 ~ IN07 | |
Output : 8 photo-coupler isolated | |
Output range : Open collector 0 ~ 45Vdc(on card) | |
Output rating : (With ADP9201 DIN wiring board) | |
3A @250Vac, 30Vdc(Relay) | |
1A @48Vdc(NMOS) | |
1A @24Vdc(PMOS) | |
2A @240Vac(SSR) | |
Sink current : 500mA(peak) per channel(on card) | |
Switching speed : 20KHz(max)(MOS out only) | |
Main Card -- Timer | |
Timer time base : 1us | |
Timer / counter length : 32-bit | |
Main Card -- General | |
Card ID : 16 locations set by rotary switch | |
Insulation resistance : 1000M Ohm(min) at 1000Vdc | |
Isolation voltage : 2500Vac 1Min | |
PCIe : x1 | |
Connector : one 20-pin SCSI II centronic female connector | |
one 20-pin flat cable connector | |
Operation temperature : 0 to +70 degree C | |
Storage temperature : -20 to +80 degree C | |
Operation humidity : 5~95% RH, non-condensing | |
Dimensions : 130(W)*102(H) mm, 5.2(W)*4.1(H) in | |
DIN rail mounted wiring board | |
ADP3101DIN/ADP3101DDIN DIN rail mounted wiring board | |
Power Requirement : 24Vdc ± 4Vdc | |
Single end / differential signal : jumper select | |
Connector : 20-pin SCSI II centronic cable to connect main and wiring board | |
On board build-in s.p.s. : +5Vdc 500mA(max) | |
Operation Temperature : 0 to +70 degree C | |
Operation Humidity : 5~95% RH, non-condensing | |
Dimension : 86(W)*103(L)*45(H)mm; 3.4(W)*4.1(L)*1.8(H)in | |
ADP9201DIN DIN rail mounted wiring board | |
Power Requirement : 24Vdc ± 4Vdc | |
Input : 8 with LED indicator | |
Output : ADP9201DIN(R) : 8 Relay(3A @250Vac, 3A @30Vdc) with LED indicator | |
ADP9201DIN(N) : 8 NMOS(Sink 1A @48Vdc) with LED Indicator | |
ADP9201DIN(P) : 8 PMOS(Source 1A @24Vdc) with LED Indicator | |
ADP9201DIN(S) : 8 SSR(2A @240Vac) with LED indicator | |
Connector : One 20-pin male flat cable connector | |
Operation Temperature : 0 to +70 degree C | |
Operation Humidity : 5~95% RH, non-condensing | |
Dimension : ADP9201DIN(R) / (N) / (P) : 86(W)*103(L)*45(H) mm, 3.4(W)*4.1(L)*1.8(H) in | |
ADP9201DIN(S) : 86(W)*103(L)*50(H) mm, 3.4(W)*4.1(L)*2.0(H) in | |
JS51053 20PM DIN rail dummy wiring board | |
Dimension : 86(W)*79(L)*52(H) mm, 3.4(W)*3.2(L)*2.1(H) in |
Download | |||||||||
Driver, DLL, Demo and Example Program | 3D Models | Manual | Catalog | ||||||
Winxp/7 (32bit) | Win7 (64bit) | Win10 (32bit) | Win10 (64bit) | ||||||
Ordering Information | ||
PRODUCT | DESCRIPTIONS | |
1. | One-axis Quadrature Encoder Counter Card (up to 16MHz quadrature input) | |
2. | DIN rail mounted wiring board matched LSI3101/3101A/3181/8101/8181, quadrature counter related function for JF1 | |
3. | DIN rail mounted wiring board matched LSI3101/3101A/3181/8101/8181, quadrature counter related function for JF1 (True-differential) | |
4. | 20-pin SCSI II centronic cable 1.5M for JF1 | |
5. | 20-pin SCSI II centronic cable 3.0M for JF1 | |
6. | DIN rail mounted dummy wiring board for general digital I/O, Transistor out for ADP9201_JM1 | |
7. | DIN rail mounted wiring board with 16 I/O LED indicators and Relay output for 8 DI,8 DO for ADP9201_JM1 | |
8. | DIN rail mounted wiring board with 16 I/O LED indicators and NMOS output for 8 DI, 8 DO for ADP9201_JM1 | |
9. | DIN rail mounted wiring board with 16 I/O LED indicators and PMOS output for 8 DI,8 DO for ADP9201_JM1 | |
10. | DIN rail mounted wiring board with 16 I/O LED indicators and SSR output for 8 DI, 8 DO for ADP9201_JM1 | |
11. | 20-pin flat cable 1.5M for ADP9201_JM1 | |
12. | 20-pin flat cable 3.0M for ADP9201_JM1 |