Applications | ||
Analog input section : For measurement of analog signal such as : temperature; voltage; current; flow light | ||
Analog output section : For control or signal generation such as : inverter speed; servo motor speed; wave generation; valve control; light control | ||
Digital section : For the control of digital i/o : switch input; relay control; trigger output | ||
Timer section : event counting; periodic interrupt source; duration counter | ||
Features | ||
Software programmable Single end 8 channel or differential 4 channel AD input | ||
AD Resolution : 12/16-bit | ||
Software selectable input range : -10V~ +10V, -5V~ +5V, 0~ +10V, 0~ +5V | ||
2 channel DA output for -10~ +10V | DA resolution : 13/17-bit | |
8 bit isolated digital input | 8 bit isolated digital output | |
No output transition during start-up | 32-bit timer with zero-crossing interrupt | |
Keep output state after hot reset (jumper selectable) | External triggered interrupt(on IN07 ~ IN00) | |
Software debounce : No debounce, 100Hz, 200Hz, 1KHz | ||
Specifications (With Matched Wiring Board) | ||
Main Card -- Analog Input | ||
Input Channels : single end 8 channel(max) or differential 4 channel(max) | ||
Resolution : 12-bit (AIO6328) / 16-bit (AIO6328A) | Input Range : 0 ~ 5V, -5V ~ +5V, 0 ~ 10V, -10V ~ +10V | |
Input Impedance : 21K ohm (unipolar) | Conversion speed : 10us per channel | |
16K ohm (bipolar) | Zero Error : Bipolar -10~ +10 LSB(max) | |
Integral linearity error : -1~ +1 LSB | Unipolar -5~ +5 LSB(max) | |
Gain Error : -10~ +10 LSB(max) | ||
Main Card -- Analog Output | ||
Output Channel : 2 | Range : -10V ~ +10V | |
Resolution : 13-bit (AIO6328) / 17-bit (AIO6328A) | ||
Main Card -- Digital I/O | ||
IO channel : isolated 8 DI, 8 DO | ||
Output range : open collector 0 ~ 45Vdc (without wiring board) | ||
Sink current : 500mA(peak) per output bit (without wiring board) | ||
Switch speed : 20KHz (without wiring board or MOS type output) | ||
Output rating : using wiring board ADP9201DIN series | ||
3A @250Vac, 30Vdc(Relay) | ||
1A @48Vdc(NMOS) | ||
1A @24Vdc(PMOS) | ||
2A @240Vac(SSR) (with wiring board) | ||
Main Card -- Timer / Counter | ||
Channels : 1 | Time Base : timer @1MHz | |
Data length : 32-bit | Interrupt : time up interrupt | |
Main Card -- General | ||
PCI data width : 32-bit | Card ID : 0 ~ 3 | |
Insulation resistance : 100M Ohm(min) at 1000Vdc | Operation temperature : 0 to +70 degree C | |
Isolation voltage : 2500Vac 1Min(digital block only) | Storage temperature : -20 to +80 degree C | |
Connector : One 20-pin male flat cable connector | Operation humidity : 5~95% RH, non-condensing | |
One slim type 26-pin male flat cable connector | ||
Dimensions : 90(W)*96(H) mm, 3.6(W)*3.8(H) in | ||
DIN rail mounted wiring board | ||
ADP9201DIN DIN rail mounted wiring board for DIO | ||
Power Requirement : 24Vdc± 4Vdc | Input : 8 with LED indicator | |
Output : ADP9201DIN(R) : 8 Relay(3A @250Vac, 3A @30Vdc) with LED indicator | ||
ADP9201DIN(N) : 8 NMOS(Sink 1A @48Vdc) with LED Indicator | ||
ADP9201DIN(P) : 8 PMOS(Source 1A @24Vdc) with LED Indicator | ||
ADP9201DIN(S) : 8 SSR(2A @240Vac) with LED indicator | ||
Connector : One 20-pin male flat cable connector | ||
Operation Temperature : 0 to +70 degree C | Operation Humidity : 5~95% RH, non-condensing | |
Dimension : ADP9201DIN(R)/(N)/(P) : 86(W)*103(L)*45(H) mm, 3.4(W)*3.2(L)*2.1(H) in | ||
ADP9201DIN(S) : 86(W)*103(L)*50(H) mm, 3.4(W)*4.1(L)*2.0(H) in | ||
JS51053 20PM DIN rail mounted wiring board for DIO | ||
Connection cable : 20-pin flat cable to connect main and wiring board | ||
Dimension : 86(W)*79(L)*52(H) mm, 3.4(W)*3.2(L)*2.1(H) in | ||
JS510501 25PF DIN rail mounted wiring board for AD/DA | ||
On board Connector : Female D type 25P | ||
Dimension : 86(W)*79(L)*52(H)mm, 3.4(W)*3.2(L)*2.1(H) in |
Download | |||||||
Driver, DLL, Demo and Example Program | Manual | Catalog | |||||
WinXP/7(32bit) | Win7(64bit) | Win10(32bit) | Win10(64bit) | Labview Linux 2.6 | Hardware Software | Main Card Wiring Board | |
Driver | Driver | Driver |
Ordering Information | ||
PRODUCT | DESCRIPTIONS | |
1. | AIO6328 | 12-bit Analog I/O and Digital I/O PCI-104 Module |
2. | AIO6328A | 16-bit Analog I/O and Digital I/O PCI-104 Module |
3. | JS51053 | DIN rail mounted dummy wiring board for JM1 |
4. | ADP9201DIN(R) | DIN rail mounted wiring board with 16 I/O LED indicators and Relay output for 8 DI, 8 DO for JM1 |
5. | ADP9201DIN(N) | DIN rail mounted wiring board with 16 I/O LED indicators and NMOS output for 8 DI, 8 DO for JM1 |
6. | ADP9201DIN(P) | DIN rail mounted wiring board with 16 I/O LED indicators and PMOS output for 8 DI, 8 DO for JM1 |
7. | ADP9201DIN(S) | DIN rail mounted wiring board with 16 I/O LED indicators and SSR output for 8 DI, 8 DO for JM1 |
8. | M23209 | 20-pin flat cable 3.0 M for JM1 |
9. | M23207 | 20-pin flat cable 1.5 M for JM1 |
10. | JS510501 | DIN rail mounted dummy wiring board (D type 25P female to terminals ) for JM2 |
11. | M270325X4 | D type 25P male-female extension cable 1.5M for M23405 |
12. | M270325X4S | D type 25P male-female extension cable 1.5M, shielding for M23405 |
13. | M270325X0 | D type 25P male-female extension cable 3.0M for M23405 |
14. | M270325X0S | D type 25P male-female extension cable 3.0M, shielding for M23405 |
15. | M23405* | Extension kit for JM2 (flat cable for 25P male D type connector) |