模拟量DIO8264

 Accept : P.B. / M.S. / EMG. / Contact - Start / Stop / Limit switch / sensor

                   Interlock/selective Sw. - Proximity switch

                   Aux. contact of transducer / detector

 Industrial ON/OFF control

 Low speed counter

 Frequency counter

 Hardware event capture

Features

 PCIe plug and play function with card ID for 16 identical cards

 64 isolated DI channels

 High voltage isolation on all isolated channel (2500 Vac)

 Programmable debounce at 50,100,200, 1K Hz and no de-bounce for input

 External triggered interrupt (on IN07~IN00 and TTL IO07~IO00)

 Input counter / frequency counter (on IN07~IN00 and TTL IO07~IO00)

 Keep output state after hot reset (jumper selectable)

 32bit timer with time up interrupt

Specifications (With Matched Wiring Board)

Main Card -- Input Section

 Input channel : 64 isolated digital input

 ON state : 8Vdc(max) 4mA(min)

 OFF state : 12Vdc(min) 3mA(max)

 Software debounce : No debounce, 50Hz, 100Hz, 200Hz, 1KHz

 Switching speed : 10KHz max. (limit by photo coupler speed and debounce filter)

 Interrupt : IN07 ~ IN00, TTL IO07~IO00

 Counter/frequency counter : IN07~IN00, TTL IO07~IO00

Main Card -- TTL IO

 Port : 2

 Direction : software programmable on port base

 Software debounce : No debounce, up to 8MHz

Main Card -- Timer

 Length : 32-bit @1us

 Interrupt : time up interrupt

Main Card -- General

 Card ID : 4-bit

 Insulation resistance : 100M Ohm(min) at 1000Vdc

 Isolation voltage : 2500Vac 1Min

 Connector : Centronic type SCSI II 68pin connector

 Operation temperature : 0 to +70 degree C

 Operation humidity : 5~95% RH, non-condensing

 Storage temperature : -20 to +80 degree C

 Dimensions : 165(W)*110(H) mm, 6.5(W)*4.4(H) in

DIN rail mounted wiring board

ADP8264DIN DIN rail mounted wiring board

 Power Requirement : 24Vdc ± 4Vdc

 Input : 64 with LED indicator, 8 digit per group with Green LED at first digit

 Power indicator : Red LED

 Operation temperature : 0 to 70 degree C

 Connector : One 68-pin SCSI II female connector

 Operation humidity : 5~95% RH, non-condensing

 Dimension : 121(W)*159(L)*45(H) mm, 4.8(W)*6.3(L)*1.8(H) in

JS51050 25PM DIN rail dummy wiring board

 Connection cable : D type 25P cable to connect main and wiring board

 Dimension : 86(W)*79(L)*52(H) mm, 3.4(W)*3.2(L)*2.1(H) in

 Driver, DLL, Demo and Example Program

Manual

Catalog

WinXP/7(32bit)

Win7(64bit)

Win10(32bit)

Win10(64bit)

 Hardware

 Software

 Main Card

 Wiring Board

 Driver

 Driver

 Driver

 Driver

PRODUCT

DESCRIPTIONS

1.

DIO8264

64-channel Digital Input Card for 64 Photo-coupler isolated DI with 16 TTL I/O

2.

ADP8264DIN

DIN rail mounted wiring board matched DIO8264 for 64 input

3.

M26J68681M5FW

68-pin SCSI II cable 1.5M for JF0

4.

M26J68683M0FW

68-pin SCSI II cable 3.0M for JF0

 5.

JS51050

DIN rail mounted dummy wiring board (D type 25P male to terminals ) for JM0 TTL I/O

 6.

M270325X4

D type 25P male-female cable 1.5M for SM23404

 7.

M270325X4S

D type 25P male-female cable 1.5M, shielding for SM23404

 8.

M270325X0

D type 25P male-female cable 3.0M for SM23404

 9.

M270325X0S

D type 25P male-female cable 3.0M, shielding for SM23404

 10.

SM23404*

Extension kit for JM0 (bracket and flat cable for 25P female D type connector)