Main Card | Wiring Board | Combined Product |
Applications | |
PWM Laser power control on the fly | |
Touch probe / non-touch probe trigger to latch position | |
Linear Scale / encoder F/B | |
CCD Image Capture Trigger on the fly | |
Features | |
PCI plug and play function with card ID for 16 identical cards | |
High noise immunity with magnetic / photo-coupler isolation | |
4 32-bit high speed counter for 16 MHz max. Quadrature input | |
2 32-bit timer (X, Z axis) | |
Quadrature, pulse / direction and up / down counting mode | |
Programmable multiple rate at X1, X2, X4 | |
Load preset value to counter by external or software trigger | |
Latch counter value by external trigger | |
Multiple counter reset (homing) modes with clear output | |
Differential or single-end input signal | |
Compare mode : single, auto increment and FIFO compare mode (X, Z axis) | |
Compare output gated and segment mask off | |
PWM FIFO (X, Z axis) output | |
Programmable duration for Compare out and Clear out | |
Interrupt on external trigger, compare equal, borrow, carry and counter clear | |
Supports DIN rail mounted wiring board | |
Specifications (With Matched Wiring Board) | |
Main Card -- Counter | |
Number of axes : 4, independent | |
Counter Input : A,B,Z | |
Input debounce : 512K,1M, 2M, 4M, 8M, 10M, 16M | |
Input Pulse multiple Rate : x1, x2, x4 programmable (quadrature signal only) | |
Maximum quadrature input frequency : 16MHz @x1, x2, x4 | |
Maximum input pulse frequency : 16MHz | |
Encoder Type : Single-end or differential | |
Counter Length : 32-bit | |
Counter modes : Quadrature, up / down, pulse / direction(Software select) | |
Compare Mode : Single compare | |
Auto-Increment compare | |
FIFO compare with PWM FIFO | |
Sample Clock Frequency : 198MHz | |
Software homing(reset) counter method : 1 software trigger | |
Hardware homing(reset) counter method : 5 H/W trigger | |
Comparison FIFO Depth : 1023 (all axis) | |
PWM FIFO Depth : 1023 (X, Z axis only) | |
Compare out one shot duration : 1 ~ 16777215us | |
Timer : 2 32-bit @1us time base | |
Main Card -- Digital Input | |
Home : 1 per channel(Single-end or differential) | |
Latch : 1 per channel(Single-end or differential) | |
Clear counter : 1 per channel(Single-end or differential) | |
General input : 1 per channel | |
Debounce : 100, 200,1K, No debounce | |
Polarity : non-inverting / inverting, all input signals are software programmable | |
ON state : 2.8Vdc(max) 4.5mA(min) | |
OFF state : 8Vdc (min) 3mA(max) | |
Switching Speed : 2.2KHz max.(general input) | |
2MHz(specific digital input) | |
Main Card -- Digital Output | |
Clear Output (General Output) :1 per channel | |
Compare Output (General Output) : 1 per channel | |
Polarity : non-inverting / inverting, all output signals are software programmable | |
Output rating : 3A @250Vac, 30Vdc(Relay) | |
1A @120Vdc(NMOS) | |
Switching speed : 20KHz(max)(MOS out only) | |
Main Card -- General | |
Card ID : 16 locations set by rotary switch | |
Photo isolation : All digital I/O and counter Input | |
Insulation resistance : 100M Ohm(min) at 1000Vdc | |
Isolation voltage : 2500Vac 1Min | |
PCI bus data width : 32 bits | |
Connector : One 68-pin SCSI II female connector | |
Operation temperature : 0 to +70 degree C | |
Storage temperature : -20 to +80 degree C | |
Operation humidity : 5~95% RH, non-condensing | |
Dimensions : 151(W)*110(H) mm, 6.0(W)*4.4(H) in | |
Main Card -- DIN rail mounted wiring board | |
ADP3144DIN,ADP3144ADIN DIN rail mounted wiring board | |
Power Requirement : 24Vdc ± 4Vdc | |
On Board Build-In s.p.s. : +5Vdc 500mA(Max) | |
Specific Input : 24 | |
General Input : 4 with LED indicator | |
General And Specific Output : | |
ADP3144DIN(N) : 8 NMOS(Sink 1A @120Vdc) with LED indicator | |
ADP3144DIN(R) : 8 Relay(3A @250Vac, 3A @30Vdc) with LED indicator | |
ADP3144ADIN : High speed type 8 Open-collector (5~30Vdc) with LED indicator | |
Accept Single-End Differential Input | |
Specific Encoder/Linear Scale Input Connector : four D type 9P connectors | |
Connector : One 68-pin SCSI II female connector | |
Operation Temperature : 0 to +70 degree C | |
Operation Humidity : 5~95% RH, non-condensing | |
Dimension : 86(W)*204(L)*53(H)mm, 3.4(W)*8.1(L)*2.1(H) in | |
JS51050 25PM DIN rail mounted wiring board | |
Connection cable : D type 25P cable to connect main and wiring board | |
Dimension : 86(W)*79(L)*52(H) mm, 3.4(W)*3.2(L)*2.1(H) in |
Download | |||||||||
Driver, DLL, Demo and Example Program | 3D Models | Manual | Catalog | ||||||
Winxp/7 (32bit) | Win7 (64bit) | Win10 (32bit) | Win10 (64bit) | ||||||
Ordering Information | ||
PRODUCT | DESCRIPTIONS | |
1. | 4-axis Quadrature Encoder Counter Card with 2-axis FIFO compare mode (include SM23415) | |
2. | DIN rail mounted wiring board matched LSI3144A, General output : 8 Relay for JF1 | |
3. | DIN rail mounted wiring board matched LSI3144A, General output : 8 power NMOS for JF1 | |
4. | DIN rail mounted wiring board matched LSI3144A, General output : 8 Open-collector (5Vdc ~ 30Vdc) for JF1 | |
5. | 68-pin SCSI II cable 1.5M for JF1 | |
6. | 68-pin SCSI II cable 3.0M for JF1 | |
7. | DIN rail mounted dummy wiring board (D type 25P male to terminals ) for JM1 | |
8. | D type 25P male-female cable 1.5M for SM23415 | |
9. | D type 25P male-female cable 1.5M, shielding for SM23415 | |
10. | D type 25P male-female cable 3.0M for SM23415 | |
11. | D type 25P male-female cable 3.0M, shielding for SM23415 | |
12. | Extension kit for JM1 (bracket and flat cable for 25P female D type connector) |