LSI3101/A

 Event counting

 Frequency counter

 Pulse signal receiver /display

 Linear Scale / encoder F/B

 CCD Image Capture Trigger on the fly

Features

 PCI plug and play function with card ID for 16 identical cards

 High noise immunity with magnetic / photo-coupler isolation

 Supports DIN rail mounted wiring board

 32-bit timer based on 1us time base

 8 photo isolated digital input

 8 photo isolated digital output

 Software debounce for digital input

 Software programmable I/O polarity

 Interrupt from IN00 ~ IN07

 32-bit counter

 8/16 MHz max. Quadrature input rate

 Quadrature, pulse / direction and up / down counting

 Programmable multiple rate at X1, X2, X4

 Software debounce for input signals

 Multiple counter reset(homing) modes

 Differential or single-end input signal

 Compare mode : single, auto increment and FIFO compare mode

 Output gated and segment mask off

 Programmable duration for Compare output

 Interrupt on compare equal, FIFO near end

Specifications (With Matched Wiring Board)

Main Card -- Counter

 Number of axes : 1

 Input : 5 magnetic isolation(A, B, Z, CLEAR, HOME input), TTL level

 Output : 1 magnetic isolation(compare out), TTL level

 Maximum quadrature input frequency : 8/16 MHz @ x1, x2, x4

 Encoder Type : Single-end or differential(with ADP3101/ADP3101D DIN wiring board)

 Input software debounce : 512K, 1M, 2M, 4M, 8M, 10M,16M  (programmable)

 Input multiple rate : X1, X2, X4 programmable(quadrature signal only)

 Counter length : 32-bit

 Counter Mode : (QUADRATURE), (CLOCK/DIRECTION), (UP CLOCK/ DOWN CLOCK)

 Compare Mode : Single compare

                                Auto-Increment compare

                                FIFO compare

 Sample clock frequency : 33MHz

 FIFO depth : 1023

 Compare out one shot duration : 1 ~ 65535us

Main Card -- Digital I/O

 Input : 8 photo-coupler isolated

 ON state : 2.8Vdc(max) 4.5mA(min)

 OFF state : 8Vdc(min) 3mA(max)

 Switching speed : 10KHz max.(limit by photo coupler speed and debounce filter)

 Software debounce : 100Hz, 200Hz, 1KHZ,. No debounce(programmable)

 Interrupt : at IN00 ~ IN07

 Output : 8 photo-coupler isolated

 Output range : Open collector 0 ~ 45Vdc(on card)

 Output rating : (With ADP9201 DIN wiring board)

                              3A @250Vac, 30Vdc(Relay)

                              1A @48Vdc(NMOS)

                              1A @24Vdc(PMOS)

                              2A @240Vac(SSR)

 Sink current : 500mA(peak) per channel(on card)

 Switching speed : 20KHz(max)(MOS out only)

Main Card -- Timer

 Timer time base : 1us

 Timer / counter length : 32-bit

Main Card -- General

 Card ID : 16 locations set by rotary switch

 Insulation resistance : 1000M Ohm(min) at 1000Vdc

 Isolation voltage : 2500Vac 1Min

 PCI bus data width : 32 bits

 Connector : one 20-pin SCSI II centronic female connector

                        one 20-pin flat cable connector

 Operation temperature : 0 to +70 degree C

 Storage temperature : -20 to +80 degree C

 Operation humidity : 5~95% RH, non-condensing

 Dimensions : 130(W)*102(H) mm, 5.2(W)*4.1(H) in

DIN rail mounted wiring board

ADP3101DIN/ADP3101DDIN DIN rail mounted wiring board

 Power Requirement : 24Vdc ± 4Vdc

 Single end / differential signal : jumper select

 Connector : 20-pin SCSI II centronic cable to connect main and wiring board

 On board build-in s.p.s. : +5Vdc 500mA(max)

 Operation Temperature : 0 to +70 degree C

 Operation Humidity : 5~95% RH, non-condensing

 Dimension : 86(W)*103(L)*45(H)mm; 3.4(W)*4.1(L)*1.8(H)in

ADP9201DIN DIN rail mounted wiring board

 Power Requirement : 24Vdc ± 4Vdc

 Input : 8 with LED indicator

 Output : ADP9201DIN(R) : 8 Relay(3A @250Vac, 3A @30Vdc) with LED indicator

                   ADP9201DIN(N) : 8 NMOS(Sink 1A @48Vdc) with LED Indicator

                   ADP9201DIN(P) : 8 PMOS(Source 1A @24Vdc) with LED Indicator

                   ADP9201DIN(S) : 8 SSR(2A @240Vac) with LED indicator

 Connector : One 20-pin male flat cable connector

 Operation Temperature : 0 to +70 degree C

 Operation Humidity : 5~95% RH, non-condensing

 Dimension : ADP9201DIN(R) / (N) / (P) : 86(W)*103(L)*45(H) mm, 3.4(W)*4.1(L)*1.8(H) in

                         ADP9201DIN(S) : 86(W)*103(L)*50(H) mm, 3.4(W)*4.1(L)*2.0(H) in

JS51053 20PM DIN rail dummy wiring board

 Dimension : 86(W)*79(L)*52(H) mm, 3.4(W)*3.2(L)*2.1(H) in

Driver, DLL, Demo and Example Program

3D Models

Manual

Catalog

Winxp/7

(32bit)

Win7

(64bit)

Win10

(32bit)

Win10

(64bit)

 LSI3101/A

 ADP3101DIN

 ADP3101DDIN

 ADP9201DIN(R/P/S)

 ADP9201DIN(N)

 JS51053

 Hardware

 Software

 Main Card

 Wiring Board

 Driver

PRODUCT

DESCRIPTIONS

 1.

LSI3101

One-axis Quadrature Encoder Counter Card (up to 8MHz quadrature input)

 2.

LSI3101A

One-axis Quadrature Encoder Counter Card (up to 16MHz quadrature input)

 3.

ADP3101DIN

DIN rail mounted wiring board matched LSI3101/3101A/3181/8101/8181, quadrature counter related function for JF1

 4.

ADP3101DDIN

DIN rail mounted wiring board matched LSI3101/3101A/3181/8101/8181, quadrature counter related function for JF1 (True-differential)

 5.

M262020150

20-pin SCSI II centronic cable 1.5M for JF1

 6.

M262020300

20-pin SCSI II centronic cable 3.0M for JF1

 7.

JS51053

DIN rail mounted dummy wiring board for general digital I/O, Transistor out for ADP9201_JM1

 8.

ADP9201DIN(R)

DIN rail mounted wiring board with 16 I/O LED indicators and Relay output for 8 DI,8 DO for ADP9201_JM1

 9.

ADP9201DIN(N)

DIN rail mounted wiring board with 16 I/O LED indicators and NMOS output for 8 DI, 8 DO for ADP9201_JM1

 10.

ADP9201DIN(P)

DIN rail mounted wiring board with 16 I/O LED indicators and PMOS output for 8 DI,8 DO for ADP9201_JM1

 11.

ADP9201DIN(S)

DIN rail mounted wiring board with 16 I/O LED indicators and SSR output for 8 DI, 8 DO for ADP9201_JM1

 12.

M23207

20-pin flat cable 1.5M for ADP9201_JM1

 13.

M23209

20-pin flat cable 3.0M for ADP9201_JM1