Applications |
| PWM Laser power control on the fly
|
| Touch probe / non-touch probe trigger to latch position
|
| Linear Scale / encoder F/B
|
| CCD Image Capture Trigger on the fly
|
Features |
| PCI plug and play function with card ID for 16 identical cards
|
| High noise immunity with magnetic / photo-coupler isolation
|
| 4 32-bit high speed counter for 16 MHz max. Quadrature input
|
| 2 32-bit timer (X, Z axis)
|
| Quadrature, pulse / direction and up / down counting mode
|
| Programmable multiple rate at X1, X2, X4
|
| Load preset value to counter by external or software trigger
|
| Latch counter value by external trigger
|
| Multiple counter reset (homing) modes with clear output
|
| Differential or single-end input signal
|
| Compare mode : single, auto increment and FIFO compare mode (X, Z axis)
|
| Compare output gated and segment mask off
|
| PWM FIFO (X, Z axis) output
|
| Programmable duration for Compare out and Clear out
|
| Interrupt on external trigger, compare equal, borrow, carry and counter clear
|
| Supports DIN rail mounted wiring board
|
Specifications (With Matched Wiring Board) |
| Main Card -- Counter |
| Number of axes : 4, independent
|
| Counter Input : A,B,Z
|
| Input debounce : 512K,1M, 2M, 4M, 8M, 10M, 16M
|
| Input Pulse multiple Rate : x1, x2, x4 programmable (quadrature signal only)
|
| Maximum quadrature input frequency : 16MHz @x1, x2, x4
|
| Maximum input pulse frequency : 16MHz
|
| Encoder Type : Single-end or differential
|
| Counter Length : 32-bit
|
| Counter modes : Quadrature, up / down, pulse / direction(Software select)
|
| Compare Mode : Single compare
|
| Auto-Increment compare |
| FIFO compare with PWM FIFO |
| Sample Clock Frequency : 198MHz
|
| Software homing(reset) counter method : 1 software trigger
|
| Hardware homing(reset) counter method : 5 H/W trigger
|
| Comparison FIFO Depth : 1023 (all axis)
|
| PWM FIFO Depth : 1023 (X, Z axis only)
|
| Compare out one shot duration : 1 ~ 16777215us
|
| Timer : 2 32-bit @1us time base
|
| Main Card -- Digital Input |
| Home : 1 per channel(Single-end or differential)
|
| Latch : 1 per channel(Single-end or differential)
|
| Clear counter : 1 per channel(Single-end or differential)
|
| General input : 1 per channel
|
| Debounce : 100, 200,1K, No debounce
|
| Polarity : non-inverting / inverting, all input signals are software programmable
|
| ON state : 2.8Vdc(max) 4.5mA(min)
|
| OFF state : 8Vdc (min) 3mA(max)
|
| Switching Speed : 2.2KHz max.(general input)
|
| 2MHz(specific digital input) |
| Main Card -- Digital Output |
| Clear Output (General Output) :1 per channel
|
| Compare Output (General Output) : 1 per channel
|
| Polarity : non-inverting / inverting, all output signals are software programmable
|
| Output rating : 3A @250Vac, 30Vdc(Relay)
|
| 1A @120Vdc(NMOS) |
| Switching speed : 20KHz(max)(MOS out only)
|
| Main Card -- General |
| Card ID : 16 locations set by rotary switch
|
| Photo isolation : All digital I/O and counter Input
|
| Insulation resistance : 100M Ohm(min) at 1000Vdc
|
| Isolation voltage : 2500Vac 1Min
|
| PCI bus data width : 32 bits
|
| Connector : One 68-pin SCSI II female connector
|
| Operation temperature : 0 to +70 degree C
|
| Storage temperature : -20 to +80 degree C
|
| Operation humidity : 5~95% RH, non-condensing
|
| Dimensions : 151(W)*110(H) mm, 6.0(W)*4.4(H) in
|
| Main Card -- DIN rail mounted wiring board |
| ADP3144DIN,ADP3144ADIN DIN rail mounted wiring board |
| Power Requirement : 24Vdc ± 4Vdc
|
| On Board Build-In s.p.s. : +5Vdc 500mA(Max)
|
| Specific Input : 24
|
| General Input : 4 with LED indicator
|
| General And Specific Output :
|
| ADP3144DIN(N) : 8 NMOS(Sink 1A @120Vdc) with LED indicator |
| ADP3144DIN(R) : 8 Relay(3A @250Vac, 3A @30Vdc) with LED indicator |
| ADP3144ADIN : High speed type 8 Open-collector (5~30Vdc) with LED indicator |
| Accept Single-End Differential Input
|
| Specific Encoder/Linear Scale Input Connector : four D type 9P connectors
|
| Connector : One 68-pin SCSI II female connector
|
| Operation Temperature : 0 to +70 degree C
|
| Operation Humidity : 5~95% RH, non-condensing
|
| Dimension : 86(W)*204(L)*53(H)mm, 3.4(W)*8.1(L)*2.1(H) in
|
| JS51050 25PM DIN rail mounted wiring board |
| Connection cable : D type 25P cable to connect main and wiring board
|
| Dimension : 86(W)*79(L)*52(H) mm, 3.4(W)*3.2(L)*2.1(H) in
|