Applications | ||
Industrial automation | Renishaw probe as external-trigger to latch position | |
Event counting | Linear Scale F/B | |
Frequency counter | Servo encoder F/B | |
Pulse signal receiver / display | CCD inspection F/B | |
Features | ||
High noise immunity with photo-coupler isolation | Quadrature, pulse / direction and up / down counting | |
1MHz max. Quadrature input rate | Programmable multiple rate at X1, X2, X4 | |
Three 32-bit counters | Latch counter value by external trigger | |
Load preset value to counter by external trigger or software trigger | ||
Build-in touch probe interface | Multiple counter reset(homing) modes | |
LED on touch probe flashes at hardware synchronized with probe activity status | ||
Supports DIN rail mounted wiring board | ||
Fast coordinate rebuilt at power on(for Accurite linear scale) | ||
Specifications (With Matched Wiring Board) | ||
Main Card | ||
Photo coupler Isolation Voltage : 2500Vac 1 min | Counter width : 32-bit | |
Isolation Resistance : 100M Ohm(min) 1000Vdc | Card ID : 4-bit | |
Input channel : 3-channels X, Y, Z, totally 3 compatible device units can be hooked | ||
Input signal type : photo-coupler isolated single-end input | ||
Input pulse multiple rate : X1, X2, X4 programmable(quadrature signal only) | ||
Maximum quadrature input frequency : 1MHz @X1, 1MHz @X2, 1MHz @X4 | ||
Input Mode : (QUADRATURE), (CLOCK / DIRECTION), (UP CLOCK / DOWN CLOCK) | ||
Latch input : 2 for external trigger to latch counter data to buffer(one specific, one may use as general purpose input) | ||
Homing(reset) counter method : one software trigger mode and four H/W trigger mode | ||
Polarity : all input signals are software programmable | ||
Operation temperature : 0 to 70 degree C | Operation humidity : 5~95% RH, non-condensing | |
Dimension : 130(W)*102(H) mm, 5.2(W)*4.1(H) in | ||
DIN rail mounted wiring board | ||
ADP3123DIN DIN rail mounted wiring board | ||
Power Requirement : 12Vdc ~ 24Vdc | On board build-in s.p.s. : +5Vdc 500mA(Max) | |
Differential to single-end conversion for LSI3123A | Connector : One D type 25P male connector | |
Specific Input : 3-Axis A+, A-, B+, B-, C+, C- | Operation Temperature : 0 to +70 degree C | |
Dimension : 86(W)*113(L)*47(H) mm, 3.4(W)*4.5(L)*1.9(H) in | Operation Humidity : 5~95% RH, non-condensing | |
JS51050 25PM DIN rail mounted wiring board | ||
Connection cable : D type 25P cable to connect main and wiring board | ||
Dimension : 86(W)*79(L)*52(H) mm, 3.4(W)*3.2(L)*2.1(H) in |
Download | |||||||
Driver, DLL, Demo and Example Program | Manual | Catalog | |||||
WinXP/7(32bit) | Win7(64bit) | Win10(32bit) | Win10(64bit) | Labview | Hardware Software | Main Card Wiring Board | |
Driver | Driver |
|
|
Ordering Information | ||
PRODUCT | DESCRIPTIONS | |
1. | LSI3123A | 3-axis Quadrature Encoder Counter Card(High noise immunity with photo-coupler isolation,Accurite linear scale absolute coordinate mode) |
2. | ADP3123DIN | DIN rail mounted wiring board matched LSI3123A, differential to single-end |
3. | JS51050 | DIN rail mounted dummy wiring board (D type 25P male to terminals) |
4. | M270325X4 | D type 25P male-female cable 1.5M for JF1 |
5. | M270325X4S | D type 25P male-female cable 1.5M, shielding for JF1 |
6. | M270325X0 | D type 25P male-female cable 3.0M for JF1 |
7. | M270325X0S | D type 25P male-female cable 3.0M, shielding for JF1 |