Applications | ||
Analog input section : For measurement of analog signal such as : temperature; voltage; current; flowlight | ||
Note : The analog signal should be pre-processed to the acceptable range of the card. | ||
Analog output section : For control or signal generation such as : inverter speed; servo motor speed; wave generation; valve control; light control | ||
Digital section : For the control of digital i/o : switch input; relay control; trigger output | ||
Counter / Timer section : event counting; periodic interrupt source; PWM generator (can work as D/A with external low pass filter);counter / timer with trigger out; duration counter | ||
Features | ||
Isolated 8 channel 16-bit analog inputs | ||
Software selectable input range : -10V ~ +10V, -5V ~ +5V, 0 ~10V, 0 ~ 5V | ||
Isolated 8/16 channel16-bit analog output | ||
Output range : -10V~ +10V | ||
8 isolated digital input | ||
8 isolated digital output | ||
IN0, IN1 as trigger / counter in, OUT0, OUT1 as trigger out of timer / counter function | ||
2 32-bit multifunction counters up to 33MHz : programmable one-shot; square wave generator; event counter; PWM generator | ||
Specifications (With Matched Wiring Board) | ||
Main Card -- Analog Input | ||
Input channels : isolated 8 channel single end | ||
Resolution : 16-bit | ||
Input range : -10V ~ +10V, -5V ~ +5V, 0 ~ 10V, 0 ~ 5V | ||
Input Impedance : 21K ohm (unipolar), 16K ohm (bipolar) | ||
Conversion speed : 13us per channel | ||
Integral linearity error : -1~ +1 LSB | ||
Zero Error : Bipolar -10~ +10 LSB(max) | ||
Unipolar -5~ +5 LSB(max) | ||
Gain Error : -10~ +10 LSB(max) | ||
Main Card -- Analog Output | ||
Output channels : isolated 8 channel(AIO3320A), isolated 16 channel (AIO3321A) | ||
Resolution : 16-bit | ||
Range : -10V~ +10V | ||
Capacity : ±10mA(typ) | ||
Capacitive load : ≦1000pf | ||
Auto Scan Update Rate : 2.1KHz | ||
Main Card -- Digital I/O | ||
I/O channels : isolated 8DI, 8DO | ||
Output range : open collector 0 ~ 45Vdc(without wiring board) | ||
Sink current : 500mA(peak) per output bit(without wiring board) | ||
Switch speed : 20KHz(without wiring board or MOS type output) | ||
Output rating : using wiring board ADP9201DIN series | ||
3A @250Vac, 30Vdc(Relay) | ||
1A @48Vdc(NMOS) | ||
1A @24Vdc(PMOS) | ||
2A @240Vac(SSR) | ||
Main Card -- Timer / Counter | ||
Channels : 2 | ||
Data length : 32-bit | ||
Specific input : trigger in / counter in via digital I/O port 0 | ||
Specific output : trigger out / counter out via digital I/O port 1 | ||
Time base : timer @4MHz, counter @33MHz | ||
Multi-function : programmable one-shot; square wave generator; event counter; PWM generator | ||
Main Card -- General | ||
Interrupt : from Timer/counter | ||
Card ID : 16 locations set by rotary switch | ||
PCI bus data width : 32 bits | ||
Operation temperature : 0 to +70 degree C | ||
Storage temperature : -20 to +80 degree C | ||
Operation humidity : 5~95% RH, non-condensing | ||
Dimension : 175(W)*120(H) mm, 6.9(W)*4.8(H) in | ||
DIN rail mounted wiring board | ||
JS51026 37PM DIN rail mounted wiring board for AI0 ~ AI7 and DA0 ~ DA7 | ||
Connection cable : D type 37P cable to connect main and wiring board | ||
Dimension : 90(W)*113(L)*60(H) mm, 3.6(W)*4.5(L)*2.4(H) in | ||
JS51053 20PM DIN rail mounted wiring board or JM2 digital I/O | ||
Connection cable : 20-pin flat cable to connect main and wiring board | ||
Dimension : 86(W)*79(L)*52(H) mm, 3.4(W)*3.2(L)*2.1(H) in | ||
ADP9201DIN DIN rail mounted wiring board for JM2 digital I/O | ||
Power Requirement : 24Vdc ± 4Vdc | ||
Input : 8 with LED indicator | ||
Output : ADP9201DIN(R) : 8 Relay(3A @250Vac, 3A @30Vdc) with LED indicator | ||
ADP9201DIN(N) : 8 NMOS(Sink 1A @48Vdc) with LED Indicator | ||
ADP9201DIN(P) : 8 PMOS(Source 1A @24Vdc) with LED Indicator | ||
ADP9201DIN(S) : 8 SSR(2A @240Vac) with LED indicator | ||
Connector : One 20-pin male flat cable connector | ||
Operation Temperature : 0 to +70 degree C | ||
Operation Humidity : 5~95% RH, non-condensing | ||
Dimension : ADP9201DIN(R) / (N) / (P) : 86(W)*103(L)*45(H) mm, 3.4(W)*4.1(L)*1.8(H) in | ||
ADP9201DIN(S) : 86(W)*103(L)*50(H) mm, 3.4(W)*4.1(L)*2.0(H) in |
Download | |||||||||
Driver, DLL, Demo and Example Program | 3D Models | Manual | Catalog | ||||||
Winxp/7 (32bit) | Win7 (64bit) | Win10 (32bit) | Win10 (64bit) | ||||||
Ordering Information | ||
PRODUCT | DESCRIPTIONS | |
1. | Isolated Analog I/O Card, 8 channels analog input, 8 channels analog output and 16 isolated digital I/O and multi function timer / counter (include bracket kit for digital I/O ) | |
2. | Isolated Analog I/O Card, 8 channels analog input, 16 channels analog output and 16 isolated digital I/O and multi function timer / counter (include bracket kit for digital I/O ) | |
3. | DIN rail mounted dummy wiring board for JM2 | |
4. | DIN rail mounted wiring board with 16 I/O LED indicators and Relay output for 8 DI,8 DO for JM2 | |
5. | DIN rail mounted wiring board with 16 I/O LED indicators and NMOS output for 8 DI, 8 DO for JM2 | |
6. | DIN rail mounted wiring board with 16 I/O LED indicators and PMOS output for 8 DI,8 DO for JM2 | |
7. | DIN rail mounted wiring board with 16 I/O LED indicators and SSR output for 8 DI, 8 DO for JM2 | |
8. | 20-pin flat cable 1.5M for ADP9201EK | |
9. | 20-pin flat cable 3.0M for ADP9201EK | |
10. | 20-pin flat cable 20cm for ADP9201EK to JM2 | |
11. | ADP9201 Extension kit for JM2 | |
12. | DIN rail mounted dummy wiring board (D type 37P male to terminals ) | |
13. | D type 37P male-female cable 1.5M for JF1 | |
14. | D type 37P male-female cable 1.5M, shielding for JF1 | |
15. | D type 37P male-female cable 3.0M for JF1 | |
16. | D type 37P male-female cable 3.0M, shielding for JF1 | |
17. | DIN rail mounted dummy wiring board (D type 25P male to terminals ) for JM1(AIO3321A only) | |
18. | D type 25P male-female cable 1.5M for SM23404 (AIO3321A only) | |
19. | D type 25P male-female cable 1.5M, shielding for SM23404 (AIO3321A only) | |
20. | D type 25P male-female cable 3.0M for SM23404 (AIO3321A only) | |
21. | D type 25P male-female cable 3.0M, shielding for SM23404 (AIO3321A only) | |
22. | Extension kit for JM1 (bracket and flat cable for 25P female D type connector) (AIO3321A only) (Option) |