Applications | |
Analog signal measurement for physical signal of temperature, voltage, current, flow, light......etc | |
Digital i/o control of switch input, relay control, trigger output | |
Counter / Timer for event counting, periodic interrupt source, PWM generator(can work as D/A with external low pass filter), counter / timer with trigger out, duration counter | |
Features | |
8/16/24 channel 16-bit analog inputs (standard : 8 channels) | |
Software selectable input range : -10V ~ +10V, -5V ~ +5V, 0 ~ 10V, 0 ~ 5V | |
Single end or differential analog input | |
Factory pre-calibrated analog conversion accuracy | |
2 byte-wide programmable TTL I/O | |
DIO00, DIO01 as trigger / counter in, DIO10, DIO11 as trigger out of timer / counter function | |
2 32-bit multifunction timer/counters : programmable one-shot; square wave generator; event counter; PWM generator | |
Specifications (With Matched Wiring Board) | |
Main Card -- Analog Input | |
Input channel : 8/16/24 channels (standard : 8) | |
Resolution : 16-bit | |
Input type : single end or differential | |
Input range : -10V ~ +10V, -5V ~ +5V, 0 ~ 10V, 0 ~ 5V | |
Input Impedance: 100K ohm | |
Range selection : software selectable per chip | |
Conversion speed : 6us per chip | |
Accuracy : full range within 5mV(after calibration) | |
Integral Linearity Error : -3 ~ +3 LSB(max) | |
Zero Error : - 28 ~ +28 LSB | |
Main Card -- TTL I/O | |
I/O Channels : 16 TTL (port 0, port 1) | |
Configuration : byte input / output | |
Output Capacity : (sink or source) 24mA @5V | |
Output at power on : jumper configurable at high or low | |
Main Card -- Timer / Counter | |
Channels : 2 | |
Data length : 32-bit | |
Specific input : trigger in / counter in via digital I/O port 0 | |
Specific output : trigger out / counter out via digital I/O port 1 | |
Time base : timer @1MHz, counter @33MHz | |
Multi-function : programmable one-shot; square wave generator; event counter; PWM generator | |
Main Card -- General | |
Interrupt : from TTL or Timer/counter | |
Card ID : 16 locations set by rotary switch | |
PCI bus data width : 32 bits | |
Operation temperature : 0 to +70 degree C | |
Storage temperature : -20 to +80 degree C | |
Operation humidity : 5~95% RH, non-condensing | |
Dimension : 156(W)*112(H) mm, 6.2(W)*4.5(H) in | |
DIN rail mounted wiring board | |
Connection cable : D type 37P cable to connect main and wiring board | |
Dimension : 90(W)*113(L)*60(H) mm, 3.6(W)*4.5(L)*2.4(H) in |
Download | ||||||||
Driver, DLL, Demo and Example Program | 3D Models | Manual | Catalog | |||||
Winxp/7 (32bit) | Win7 (64bit) | Win10 (32bit) | Win10 (64bit) | |||||
Ordering Information | ||
PRODUCT | DESCRIPTIONS | |
1. | Analog I/O Card 8 channels analog input, 16 TTL I/O and multi function timer / counter | |
2. | Analog I/O Card 16 channels analog input, 16 TTL I/O and multi function timer / counter (include bracket kit for 16AI) | |
3. | Analog I/O Card 24 channels analog input, 16 TTL I/O and multi function timer / counter (include bracket kit for 16AI) | |
4. | DIN rail mounted dummy wiring board (D type 37P male to terminals ) | |
5. | D type 37P male-female cable 1.5M for JF1 | |
6. | D type 37P male-female cable 1.5M, shielding for JF1 | |
7. | D type 37P male-female cable 3.0M for JF1 | |
8. | D type 37P male-female cable 3.0M, shielding for JF1 | |
9. | Extension kit (bracket and flat cable for 37P female D type connector) (AIO3311A/12A only) |