Applications | ||
Accept : P.B. / M.S. / EMG. / Contact - Start / Stop / Limit switch / sensor | ||
Interlock/selective Sw. - Proximity switch | ||
Aux. contact of transducer / detector | ||
As I/O of software PLC Controller | ||
Low speed counter | ||
Frequency counter | ||
Hardware event capture | ||
Features | ||
PCI plug and play function with card ID for 16 identical cards | ||
32 inputs and 32 outputs are photo-coupler isolated | ||
2 TTL input/output (DIO3232B) | ||
Build-in input de-bounce circuit / programmable digital de-bounce circuit (DIO3232B) | ||
Acceptexternal interrupt at IN00, IN01 / IN07~IN00, IN17~ IN10 (DIO3232B) | ||
8 input with counter / frequency counter function (DIO3232B) | ||
32 bit timer on 1us time base (DIO3232B) | ||
watch dog timer with default output at OUT07~OUT00 (DIO3232B) | ||
Specifications (With Matched Wiring Board) | ||
Main Card -- Input Section | ||
Input channel : 32 isolated digital input | ||
Rated input voltage : 24Vdc | ||
ON state : 2.8Vdc(max) 4.5mA(min) | ||
OFF state : 8Vdc(min) 3mA(max) | ||
Switching speed :10K (limit by photo-coupler speed or by debounce circuit) | ||
Debounce : 2KHz max. (with on board default debounce) (DIO3232A) | ||
software programmable @ 100,200,1K,2K Hz and no debounce (DIO3232B) | ||
Input counter : 16-bit (IN07 ~ IN00) (DIO3232B) | ||
Frequency counter : 16-bit (IN07 ~ IN00) (DIO3232B) | ||
Main Card -- Output Section | ||
Output channel : 32 isolated digital output | ||
Output capacity : POWER MOS output: 1A continuous @120Vdc(N MOS max), @ 24Vdc (P MOS max) | ||
Relay output: 3A continuous@250Vac(max) | ||
Switching speed : 20KHz(max)(MOS out only) | ||
Main Card -- TTL IO (DIO3232B) | ||
Port : 2 | ||
Direction : software programmable on port base | ||
Software debounce : No debounce, up to 10MHz | ||
Main Card -- Timer (DIO3232B) | ||
Length : 32-bit @1us | ||
Interrupt : time up interrupt | ||
Main Card -- General | ||
Card ID : 16 locations set by rotary switch | ||
Insulation resistance : 100M Ohm(min) at 1000Vdc | ||
Isolation voltage : 2500Vac 1Min | ||
PCI bus data width : 32 bits | ||
Connector : 68 pin female SCSI II connector | ||
Wiring board : 1 with round cable hook to main card | ||
External supply : 24Vdc ± 4Vdc | ||
Operation temperature : 0 to +70 degree C | ||
Storage temperature : -20 to +80 degree C | ||
Operation humidity : 5~95% RH, non-condensing | ||
Dimensions : 159(W)*106(H) mm, 6.3(W)*4.2(H) in | ||
DIN rail mounted wiring board | ||
ADP3232ADIN DIN rail mounted wiring board | ||
Power Requirement : 24Vdc ± 4Vdc | ||
Input : 32 with LED indicator, 8 digit per group with Green LED at first digit | ||
Output : ADP3232ADIN(N) : 32 NMOS(Sink 1A @120Vdc) with LED indicator, 8 digit per group with Green LED at first digit | ||
ADP3232ADIN(P) : 32 PMOS(Source 1A @24Vdc) with LED indicator, 8 digit per group with Green LED at first digit | ||
ADP3232ADIN(R) : 32 Relay(3A @250Vac, 3A @30Vdc) with LED indicator, 8 digit per group with Green LED at first digit | ||
Power indicator : Red LED | ||
Terminal : every 4 has one common terminal (Different “common” for different positive power terminal ) | ||
Connector : 68 pin female SCSI II connector | ||
Operation temperature : 0 to 70 degree C | ||
Operation humidity : 5~95% RH, non-condensing | ||
Dimension : ADP3232ADIN(N) : 121(W)*159(L)*47(H) mm, 4.8(W)*6.3(L)*1.9(H) in | ||
ADP3232ADIN(P) : 121(W)*159(L)*45(H) mm, 4.8(W)*6.3(L)*1.8(H) in | ||
ADP3232ADIN(R) : 121(W)*204(L)*45(H) mm, 4.8(W)*8.1(L)*1.8(H) in | ||
JS51050 25PM DIN rail dummy wiring board | ||
Connection cable : D type 25P cable to connect main and wiring board | ||
Dimension : 86(W)*79(L)*52(H) mm, 3.4(W)*3.2(L)*2.1(H) in |