Applications | ||
Accept : P.B. / M.S. / EMG. / Contact - Start / Stop / Limit switch / sensor | ||
Interlock/selective Sw. - Proximity switch | ||
Aux. contact of transducer / detector | ||
As I/O of S/W PLC Controller | Counting Application | |
Power MOS type output : drive high speed DC load | ||
Features | ||
PCI plug and play function with card ID for 16 identical cards | ||
48 inputs and 16 outputs are photo-coupler isolated | 2 TTL input/output (DIO3248B) | |
Build-in input de-bounce circuit / programmable digital de-bounce circuit (DIO3248B) | Accept external interrupt at IN15~ IN0 (DIO3248B) | |
8 input with counter function (DIO3248B) | 32 bit timer on 1us time base (DIO3248B) | |
watch dog timer with default output at OUT7~OUT0 (DIO3248B) | ||
Specifications (With Matched Wiring Board) | ||
Main Card -- Input Section | ||
Input channel : 48 isolated digital input | Rated input voltage : DC 24V | |
ON state : 2.8V(max) 4.5mA(min) | OFF state : 8V(min) 3mA(max) | |
Switching speed : 10K (limit by photo-coupler speed or by debounce circuit) | ||
Debounce : 2KHz max. (with on board default debounce) (DIO3248A) | ||
software programmable @ 100,200,1K,2K Hz and no debounce (DIO3248B) | ||
Input counter : 16-bit (IN7 ~ IN0) (DIO3248B) | ||
Main Card -- Output Section | ||
Output channel : 16 isolated digital output | ||
Output capacity : POWER MOS output : 1A continuous @120Vdc(N MOS max), @ 24Vdc (P MOS max) | ||
Relay output: 3A continuous@250Vac(max) | ||
Main Card -- TTL IO (DIO3248B) | ||
Port : 2 | Direction : software programmable on port base | |
Main Card -- Timer (DIO3248B) | ||
Length : 32-bit @1us | Interrupt : time up interrupt | |
Main Card -- General | ||
Card ID : 4-bit | Insulation resistance : 100M Ohm(min) at 1000Vdc | |
Isolation voltage : 2500Vac 1Min | PCI bus data width : 32 bits | |
Connector : One 68-pin SCSI II female connector | Wiring board : 1 with round cable hook to main card | |
External supply : DC 24 ± 4V | Operation temperature : 0 to +70 degree C | |
Storage temperature : -20 to +80 degree C | Operation humidity : 5~95% RH, non-condensing | |
Dimensions : 159(W)*106(H) mm, 6.3(W)*4.2(H) in | ||
DIN rail mounted wiring board | ||
ADP3248DIN DIN rail mounted wiring board | ||
Power Requirement : 24Vdc ± 4Vdc | ||
Input : 48 with LED indicator, 8 digit per group with Green LED at first digit | ||
Output : | ||
ADP3248DIN(N) : 16 NMOS(Sink 1A @120Vdc) with LED indicator, 8 digit per group with Green LED at first digit | ||
DIO3248DIN(P) : 16 PMOS(Source 1A @24Vdc) with LED indicator, 8 digit per group with Green LED at first digit | ||
DIO3248DIN(R) : 16 Relay( 3A @250Vac, 3A @30Vdc) with LED indicator, 8 digit per group with Green LED at first digit | ||
Power indicator : Red LED | Operation temperature : 0 to 70 degree C | |
Connector : One 68-pin SCSI II female connector | Operation humidity : 5~95% RH, non-condensing | |
Dimension : ADP3248DIN(N) : 121(W)*159(L)*47(H) mm, 4.8(W)*6.3(L)*1.9(H) in | ||
DIO3248DIN(P)/(R) : 121(W)*159(L)*45(H) mm, 4.8(W)*6.3(L)*1.8(H) in | ||
JS51050 25PM DIN rail dummy wiring board | ||
Connection cable : D type 25P cable to connect main and wiring board | ||
Dimension : 86(W)*79(L)*52(H) mm, 3.4(W)*3.2(L)*2.1(H) in |
Download | |||||||
Driver, DLL, Demo and Example Program | Manual | Catalog | |||||
WinXP/7(32bit) | Win7(64bit) | Win10(32bit) | Win10(64bit) | Labview | Hardware(DIO3248A) Hardware(DIO3248B) Software(DIO3248A) Software(DIO3248B) | Main Card Wiring Board | |
Driver(DIO3248A) Driver(DIO3248B) | Driver(DIO3248A) Driver(DIO3248B) | Driver(DIO3248A) Driver(DIO3248B) | Driver(DIO3248A) Driver(DIO3248B) |
Ordering Information | ||
PRODUCT | DESCRIPTIONS | |
1. | DIO3248A | 64-channel Digital I/O Card for 48 DI and 16 DO Photo-coupler isolated |
2. | DIO3248B | 64-channel Digital I/O Card for 48 DI and 16 DO Photo-coupler isolated with 16TTL I/O |
3. | ADP3248DIN(N) | DIN rail mounted wiring board matched DIO3248A/3248B for 48 input and 16 power NMOS output |
4. | DIO3248DIN(P) | DIN rail mounted wiring board matched DIO3248A/3248B for 48 input and 16 power PMOS output |
5. | DIO3248DIN(R) | DIN rail mounted wiring board matched DIO3248A/3248B for 48 input and 16 Relay output |
6. | M266868150 | 68-pin SCSI II cable 1.5M for JF1 |
7. | M266868300 | 68-pin SCSI II cable 3.0M for JF1 |
8. | JS51050 | DIN rail mounted dummy wiring board (D type 25P male to terminals ) for JM1 TTL I/O (DIO3248B only) |
9. | M270325X4 | D type 25P male-female cable 1.5M for SM23404 (DIO3248B only) |
10. | M270325X4S | D type 25P male-female cable 1.5M, shielding for SM23404 (DIO3248B only) |
11. | M270325X0 | D type 25P male-female cable 3.0M for SM23404 (DIO3248B only) |
12. | M270325X0S | D type 25P male-female cable 3.0M, shielding for SM23404 (DIO3248B only) |
13. | SM23404* | Extension kit for JM1 (bracket and flat cable for 25P female D type connector) (DIO3248B only) |