Applications | ||
Accept : P.B. / M.S. / EMG. / Contact - Start / Stop / Limit switch / sensor | ||
Interlock/selective Sw. - Proximity switch | ||
Aux. contact of transducer / detector | ||
As I/O of S/W PLC Controller | Counting Application | |
Power MOS type output : drive high speed DC load | ||
Features | ||
PCI plug and play function with card ID for 16 identical cards | ||
32 inputs and 32 outputs are photo-coupler isolated | 2 TTL input/output (DIO3232B) | |
Build-in input de-bounce circuit / programmable digital de-bounce circuit (DIO3232B) | Acceptexternal interrupt at IN00, IN01 / IN07~IN00, IN17~ IN10 (DIO3232B) | |
8 input with counter / frequency counter function (DIO3232B) | 32 bit timer on 1us time base (DIO3232B) | |
watch dog timer with default output at OUT07~OUT00 (DIO3232B) | ||
Specifications (With Matched Wiring) | ||
Main Card -- Input Section | ||
Input channel : 32 isolated digital input | Rated input voltage : DC 24V | |
ON state : 2.8V(max) 4.5mA(min) | OFF state : 8V(min) 3mA(max) | |
Switching speed :10K (limit by photo-coupler speed or by debounce circuit) | ||
Debounce : 2KHz max. (with on board default debounce) (DIO3232A) | ||
software programmable @ 100,200,1K,2K Hz and no debounce (DIO3232B) | ||
Input counter : 16-bit (IN07 ~ IN00) (DIO3232B) | Frequency counter : 16-bit (IN07 ~ IN00) (DIO3232B) | |
Main Card -- Output Section | ||
Output channel : 32 isolated digital output | Switching speed : 20KHz(max)(MOS out only) | |
Output capacity : POWER MOS output: 1A continuous @120Vdc(N MOS max), @ 24Vdc (P MOS max) | ||
Relay output: 3A continuous@250Vac(max) | ||
Main Card -- TTL IO(DIO3232B) | ||
Port : 2 | Direction : software programmable on port base | |
Main Card -- Timer (DIO3232B) | ||
Length : 32-bit @1us | Interrupt : time up interrupt | |
Main Card -- General | ||
Card ID : 4-bit | Insulation resistance : 100M Ohm(min) at 1000Vdc | |
Isolation voltage : 2500Vac 1Min | PCI bus data width : 32 bits | |
Connector : One 68-pin SCSI II female connector | Wiring board : 1 with round cable hook to main card | |
External supply : DC 24 ± 4V | Operation temperature : 0 to +70 degree C | |
Storage temperature : -20 to +80 degree C | Operation humidity : 5~95% RH, non-condensing | |
Dimensions : 159(W)*106(H) mm, 6.3(W)*4.2(H) in | ||
DIN rail mounted wiring board | ||
ADP3232ADIN DIN rail mounted wiring board | ||
Power Requirement : 24Vdc ± 4Vdc | ||
Input : 32 with LED indicator, 8 digit per group with Green LED at first digit | ||
Output : | ||
ADP3232ADIN(N) : 32 NMOS(Sink 1A @120Vdc) with LED indicator, 8 digit per group with Green LED at first digit | ||
ADP3232ADIN(P) : 32 PMOS(Source 1A @24Vdc) with LED indicator, 8 digit per group with Green LED at first digit | ||
ADP3232ADIN(R) : 32 Relay(3A @250Vac, 3A @30Vdc) with LED indicator, 8 digit per group with Green LED at first digit | ||
Power indicator : Red LED | Operation temperature : 0 to 70 degree C | |
Connector : One 68-pin SCSI II female connector | Operation humidity : 5~95% RH, non-condensing | |
Dimension : ADP3232ADIN(N) : 121(W)*159(L)*47(H) mm, 4.8(W)*6.3(L)*1.9(H) in | ||
ADP3232ADIN(P) : 121(W)*159(L)*45(H) mm, 4.8(W)*6.3(L)*1.8(H) in | ||
ADP3232ADIN(R) : 121(W)*204(L)*45(H) mm, 4.8(W)*8.1(L)*1.8(H) in | ||
JS51050 25PM DIN rail dummy wiring board | ||
Connection cable : D type 25P cable to connect main and wiring board | ||
Dimension : 86(W)*79(L)*52(H) mm, 3.4(W)*3.2(L)*2.1(H) in |
Download | |||||||
Driver, DLL, Demo and Example Program | Manual | Catalog | |||||
WinXP/7(32bit) | Win7(64bit) | Win10(32bit) | Win10(64bit) | Labview | Hardware(DIO3232A) Hardware(DIO3232B) Software(DIO3232A) Software(DIO3232B) | Main Card Wiring Board | |
Driver(DIO3232A) Driver(DIO3232B) | Driver(DIO3232A) Driver(DIO3232B) | Driver(DIO3232A) Driver(DIO3232B) | Driver(DIO3232A) Driver(DIO3232B) |
Ordering Information | ||
PRODUCT | DESCRIPTIONS | |
1. | DIO3232A | 64-channel Digital I/O Card for 32 DI 32 DO Photo-coupler isolated |
2. | DIO3232B | 64-channel Digital I/O Card for 32 DI 32 DO Photo-coupler isolated with 16 TTL I/O |
3. | ADP3232ADIN(N) | DIN rail mounted wiring board matched DIO3232A/3232B for 32 input and 32 power NMOS output |
4. | ADP3232ADIN(P) | DIN rail mounted wiring board matched DIO3232A/3232B for 32 input and 32 power PMOS output |
5. | ADP3232ADIN(R) | DIN rail mounted wiring board matched DIO3232A/3232B for 32 input and 32 power Relay output |
6. | M266868150 | 68-pin SCSI II cable 1.5M for JF1 |
7. | M266868300 | 68-pin SCSI II cable 3.0M for JF1 |
8. | JS51050 | DIN rail mounted dummy wiring board (D type 25P male to terminals ) for JM1 TTL I/O (DIO3232B only) |
9. | M270325X4 | D type 25P male-female cable 1.5M for SM23404 (DIO3232B only) |
10. | M270325X4S | D type 25P male-female cable 1.5M, shielding for SM23404 (DIO3232B only) |
11. | M270325X0 | D type 25P male-female cable 3.0M for SM23404(DIO3232B only) |
12. | M270325X0S | D type 25P male-female cable 3.0M, shielding for SM23404 (DIO3232B only) |
13. | SM23404* | Extension kit for JM1 (bracket and flat cable for 25P female D type connector) (DIO3232B only) |