Applications | ||
Accept : P.B. / M.S. / EMG. / Contact - Start / Stop / Limit switch / sensor | ||
Interlock/selective Sw. - Proximity switch | ||
Aux. contact of transducer / detector | ||
As I/O of S/W PLC Controller | Industrial ON/OFF control | |
Low speed counter | Frequency counter | |
Hardware event capture | ||
Features | ||
PCIe plug and play function with card ID for 16 identical cards | ||
16 isolated DI and 16 isolated DO channels | ||
High voltage isolation on all isolated channel (2500 Vac) | ||
Programmable debounce at 50,100,200, 1K Hz and no de-bounce for input | ||
No output transition during start-up | Output status readback | |
External triggered interrupt (on IN07~IN00 and TTL IO07~IO00) | ||
Input counter / frequency counter (on IN07~IN00 and TTL IO07~IO00) | ||
Keep output state after hot reset (jumper selectable) | ||
Watch dog timer with default output on OUT07~OUT00 | ||
32bit timer with time up interrupt | ||
Specifications (With Matched Wiring Board) | ||
Main Card -- Input Section | ||
Input channel : 16 isolated digital input | Rated input voltage : DC 24V | |
ON state : 8Vdc(max) 4mA(min) | OFF state : 12Vdc(min) 3mA(max) | |
Software debounce : No debounce, 50Hz, 100Hz, 200Hz, 1KHz | ||
Switching speed : 10KHz max. (limit by photo coupler speed and debounce filter) | ||
Interrupt : IN07 ~ IN00, TTL IO07~IO00 | ||
Counter/frequency counter : IN07~IN00, TTL IO07~IO00 | ||
Main Card -- Output Section | ||
Output channel : 16 isolated digital output | Output capacity : 3A@250Vac, 30Vdc (Relay) | |
Switching speed : 20KHz(max)(MOS out only) | 1A @ 24Vdc (PMOS) | |
1A @ 120Vdc (NMOS) with wiring board | ||
Main Card -- TTL IO | ||
Port : 2 | Direction : software programmable on port base | |
Software debounce : No debounce, up to 8MHz | ||
Main Card -- Timer | ||
Length : 32-bit @1us | Interrupt : time up interrupt | |
Main Card -- General | ||
Card ID : 4-bit | Insulation resistance : 100M Ohm(min) at 1000Vdc | |
Isolation voltage : 2500Vac 1Min | Connector : Centronic type SCSI II 68pin connector | |
Operation temperature : 0 to +70 degree C | Operation humidity : 5~95% RH, non-condensing | |
Storage temperature : -20 to +80 degree C | Dimensions : 165(W)*110(H) mm, 6.5(W)*4.4(H) in | |
DIN rail mounted wiring board | ||
ADP8216DIN DIN rail mounted wiring board | ||
Power Requirement : 24Vdc ± 4Vdc | ||
Input : 16 with LED indicators, 8 digit per group with Green LED at first digit | ||
Output : | ||
ADP8216DIN(N) : 16 NMOS (Sink 1A @120Vdc) with LED indicators, 8 digit per group with Green LED at first digit | ||
ADP8216DIN(P) : 16 PMOS (Source 1A @24Vdc) with LED indicators, 8 digit per group with Green LED at first digit | ||
ADP8216DIN(R) : 16 Relays (3A @250Vac, 3A @30Vdc) with LED indicators, 8 digit per group with Green LED at first digit | ||
ADP8216DIN(RZ) : 16 Relays with ZNR protected and LED indicators (3A @250Vac, 3A @30Vdc), 8 digit per group with Green LED at first digit | ||
Power indicator : Red LED | Operation temperature : 0 to 70 degree C | |
Connector : One 68-pin SCSI II female connector | Operation humidity : 5~95% RH, non-condensing | |
Dimension : ADP8216DIN(N) : 121(W)*159(L)*47(H) mm, 4.8(W)*6.3(L)*1.9(H) in | ||
ADP8216DIN(P) : 121(W)*159(L)*45(H) mm, 4.8(W)*6.3(L)*1.8(H) in | ||
ADP8216DIN(R)/ADP8216DIN(RZ) : 121(W)*204(L)*45(H) mm, 4.8(W)*8.1(L)*1.8(H) in | ||
JS51050 25PM DIN rail dummy wiring board | ||
Connection cable : D type 25P cable to connect main and wiring board | ||
Dimension : 86(W)*79(L)*52(H) mm, 3.4(W)*3.2(L)*2.1(H) in |
Download | |||||||
Driver, DLL, Demo and Example Program | Manual | Catalog | |||||
WinXP/7(32bit) | Win7(64bit) | Win10(32bit) | Win10(64bit) | Labview | Hardware Software | Main Card Wiring Board | |
Driver | Driver | Driver | Driver |
Ordering Information | ||
PRODUCT | DESCRIPTIONS | |
1. | DIO8216 | 32-channel Digital I/O Card for 16 DI 16 DO Photo-coupler isolated with 16 TTL I/O |
2. | ADP8216DIN(N) | DIN rail mounted wiring board matched DIO8216 for 16 input and 16 power NMOS output |
3. | ADP8216DIN(P) | DIN rail mounted wiring board matched DIO8216 for 16 input and 16 power PMOS output |
4. | ADP8216DIN(R) | DIN rail mounted wiring board matched DIO8216 for 16 input and 16 power Relay output |
5. | ADP8216DIN(RZ) | DIN rail mounted wiring board matched DIO8216 for 16 input and 16 power Relay output with ZNR protection for DO |
6. | M26J68681M5FW | 68-pin SCSI II cable 1.5M for JF0 |
7. | M26J68683M0FW | 68-pin SCSI II cable 3.0M for JF0 |
8. | JS51050 | DIN rail mounted dummy wiring board (D type 25P male to terminals ) for JM0 TTL I/O |
9. | M270325X4 | D type 25P male-female cable 1.5M for SM23404 |
10. | M270325X4S | D type 25P male-female cable 1.5M, shielding for SM23404 |
11. | M270325X0 | D type 25P male-female cable 3.0M for SM23404 |
12. | M270325X0S | D type 25P male-female cable 3.0M, shielding for SM23404 |
13. | SM23404* | Extension kit for JM0 (bracket and flat cable for 25P female D type connector) |