aApplications | ||
Accept : P.B. / M.S. / EMG. / Contact - Start / Stop / Limit switch / sensor | ||
Interlock/selective Sw. - Proximity switch | ||
Aux. contact of transducer / detector | ||
As I/O of S/W PLC Controller | ||
Industrial ON/OFF control | ||
Features | ||
8/16 isolated DI and 8/16 isolated DO channels | 32-bit timer with time up interrupt | |
High voltage isolation on all isolated channel (2500Vac) | ||
Software debounce : No debounce, 100Hz, 200Hz, 1KHz | ||
No output transition during start-up | Output status readback | |
External triggered interrupt(on IN07 ~ IN00) | Keep output state after hot reset (jumper selectable) | |
Specifications (With Matched Wiring Board) | ||
Main Card -- Input Section | ||
Input : 8/16 isolated digital input | ||
Software debounce : No debounce, 100Hz, 200Hz, 1KHz | ||
ON state : 2.8Vdc(max) 4.5mA(min) | OFF state : 8Vdc(min) 3mA(max) | |
Switching Speed : limited by photo coupler speed | Interrupt : IN07 ~ IN00 | |
Main Card -- Output Section | ||
Output : 8/16 isolated digital output | Output rating : 3A @250Vac, 30Vdc(Relay) | |
Output range : Open collector 0 ~ 45Vdc(on card) | 1A @48Vdc(NMOS) | |
Sink current : 500mA(peak) per channel(on card) | 1A @24Vdc(PMOS) | |
Switching speed : 20KHz(max)(MOS out only) | 2A @240Vac(SSR)(with wiring board) | |
Main Card -- Timer | ||
Length : 32-bit @1us | Interrupt : time up interrupt | |
Main Card -- General | ||
Card ID : 0~3 | Operation temperature : 0 to +70 degree C | |
Insulation resistance : 100M Ohm(min) at 1000Vdc | Storage temperature : -20 to +80 degree C | |
Isolation voltage : 2500Vac 1Min | Operation humidity : 5~95% RH, non-condensing | |
Connector : One / Two 20-pin male flat cable connectors | Dimensions : 90(W)*96(H) mm, 3.6(W)*3.8(H) in | |
DIN rail mounted wiring board | ||
ADP9201DIN DIN rail mounted wiring board | ||
Power Requirement : 24Vdc ± 4Vdc | Input : 8 with LED indicator | |
Output : ADP9201DIN(R) : 8 Relay(3A @250Vac, 3A @30Vdc) with LED indicator | ||
ADP9201DIN(N) : 8 NMOS(Sink 1A @48Vdc) with LED Indicator | ||
ADP9201DIN(P) : 8 PMOS(Source 1A @24Vdc) with LED Indicator | ||
ADP9201DIN(S) : 8 SSR(2A @240Vac) with LED indicator | ||
Connector : One 20-pin male flat cable connector | ||
Operation Temperature : 0 to +70 degree C | Operation Humidity : 5~95% RH, non-condensing | |
Dimension : ADP9201DIN(R)/(N)/(P) : 86(W)*103(L)*45(H) mm, 3.4(W)*3.2(L)*2.1(H) in | ||
ADP9201DIN(S) : 86(W)*103(L)*50(H) mm, 3.4(W)*4.1(L)*2.0(H) in | ||
JS51053 20PM DIN rail mounted wiring board | ||
Connection cable : 20-pin flat cable to connect main and wiring board | ||
Dimension : 86(W)*79(L)*52(H) mm, 3.4(W)*3.2(L)*2.1(H) in |
Download | |||||||
Driver, DLL, Demo and Example Program | Manual | Catalog | |||||
WinXP/7(32bit) | Win7(64bit) | Win10(32bit) | Win10(64bit) | Labview Linux 2.6 | Hardware Software | Main Card Wiring Board | |
Driver | Driver | Driver |
Ordering Information | ||
PRODUCT | DESCRIPTIONS | |
1. | DIO6208 | 16-channel Digital I/O Card for 8 DI and 8 DO Photo-coupler isolated |
2. | DIO6216 | 32-channel Digital I/O Card for 16 DI and 16 DO Photo-coupler isolated |
3. | ADP9201DIN(R) | DIN rail mounted wiring board with 16 I/O LED indicators and Relay output for 8 DI, 8 DO |
4. | ADP9201DIN(N) | DIN rail mounted wiring board with 16 I/O LED indicators and NMOS output for 8 DI, 8 DO |
5. | ADP9201DIN(P) | DIN rail mounted wiring board with 16 I/O LED indicators and PMOS output for 8 DI, 8 DO |
6. | ADP9201DIN(S) | DIN rail mounted wiring board with 16 I/O LED indicators and SSR output for 8 DI, 8 DO |
7. | JS51053 | DIN rail mounted dummy wiring board |
8. | M23209 | 20-pin flat cable 3.0 M for ADP9201_JM1/ADP9201_JM2 |
9. | M23207 | 20-pin flat cable 1.5 M for ADP9201_JM1/ADP9201_JM2 |