EMC8432 | EMC8485 |
Applications | ||
For RS-232/422/485 to ethernet converter | ||
For Ethernet to RS-232/422/485 converter | ||
Features | ||
Over-voltage protection on digital input | ||
Various IO combinations : 8-bit configurable I/O's, any bit can be input or output | ||
High drive capacity on digital output | ||
UDP and MODBUS TCP protocol | ||
Isolated RS422/485 to Ethernet (EMC8485) | ||
RS232 to Ethernet (EMC8432) | ||
Input counter function | ||
Baudrate up to 921.6K | ||
Wide power range | ||
10/100M auto detection | ||
Standalone function:step sequence control in struction | ||
Peer to peer response time < 2ms | ||
8 enhanced TTL I/O | ||
Software key function | ||
Specifications | ||
Isolation : magnetic coupler (EMC8485) | ||
Baud rate : 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 921600 | ||
Data Bits : 5, 6, 7, 8 | ||
Stop bits : 1, 1.5 | ||
Parity : None, Even, Odd | ||
Digital Input | ||
Input points : max 8 (Configurable) | ||
Logic high level : 3.15V(min) | ||
Logic low level : 1.35V(max) | ||
Over-voltage protection : 60Vdc(max) | ||
Over-current protection : 50mA(max) | ||
Counter input : any digital input | ||
Counter speed : 100Hz(max) square wave | ||
Digital Output | ||
Transistor output : max 8 (Configurable) | ||
Transistor capacity : 50mA, 45Vdc(max) | ||
Standalone Function | ||
32 step sequence control instructions | ||
Ethernet | ||
10/100M auto switch x 2 port | ||
WDT : 1~1000sec based on 0.1 sec time base for communication discontinuity detect | ||
Response time 2ms | ||
General | ||
Power requirement : 12Vdc ~ 24Vdc | ||
Operation Temperature : 0 to +70 degree C | ||
Storage Temperature : -20 to +80 degree C | ||
Operation Humidity : 5~95% RH, non-condensing | ||
Dimension : 114.3(L)*135.8(W)*34(H) mm, 4.5(L)*5.4(W)*1.4(H) in |
Download | |||||||
Driver, DLL, Demo and Example Program | 3D Models | Manual | Catalog | ||||
Winxp/7 (32bit) | Win7 (64bit) | Win10 (32bit) | Win10 (64bit) | ||||
Ordering Information | ||
PRODUCT | DESCRIPTIONS | |
1. | Ethernet I/O Module to RS-232 (8 IO) Module (include M23406) | |
2. | Ethernet I/O Module to RS-422/485 (8 IO) Module | |
3. | D type 9P male cable 10cm(EMC8432 only) | |
4. | 110/220Vac to 24Vdc @1.5A power supply |