Applications | ||
Analog input section : For measurement of analog signal such as : temperature; voltage; current; flow light | ||
Analog output section : For control or signal generation such as : inverter speed; servo motor speed; wave generation; valve control; light control | ||
Digital section : For the control of digital i/o : switch input; relay control; trigger output | ||
Counter / Timer section : event counting; periodic interrupt source; PWM generator (can work as D/A with external low pass filter); counter / timer with trigger out; duration counter | ||
Features | ||
Isolated 8 channel 16-bit analog inputs | ||
Software selectable input range : -10V ~ +10V, -5V ~ +5V, 0 ~10V, 0 ~ 5V | ||
Isolated 8/16 channel 16-bit analog output | Output range : -10V~ +10V | |
8 isolated digital input | 8 isolated digital output | |
IN0, IN1 as trigger / counter in, OUT0, OUT1 as trigger out of timer / counter function | ||
2 32-bit multifunction counters up to 33MHz : programmable one-shot; square wave generator; event counter; PWM generator | ||
Specifications (With Matched Wiring Board) | ||
Main Card -- Analog Input | ||
Input channels : isolated 8 channel single end | Input range : -10V ~ +10V, -5V ~ +5V, 0 ~ 10V, 0 ~ 5V | |
Resolution : 16-bit | Input Impedance : 21K ohm (unipolar) | |
Conversion speed : 13us per channel | 16K ohm (bipolar) | |
Zero Error : Bipolar -10~ +10 LSB(max) | Integral linearity error : -1~ +1 LSB | |
Unipolar -5~ +5 LSB(max) | Gain Error : -10~ +10 LSB(max) | |
Main Card -- Analog Output | ||
Output channels : isolated 8 channel(AIO3320A), isolated 16 channel (AIO3321A) | Output range : -10V ~ +10V | |
Resolution : 16-bit | Auto scan update rate : 2.1KHz | |
Main Card -- Digital I/O | ||
I/O channels : isolated 8DI, 8DO | ||
Output range : open collector 0 ~ 45Vdc(without wiring board) | ||
Sink current : 500mA(peak) per output bit(without wiring board) | ||
Switch speed : 20KHz(without wiring board or MOS type output) | ||
Output rating : using wiring board ADP9201DIN series | ||
3A @250Vac, 30Vdc(Relay) | ||
1A @48Vdc(NMOS) | ||
1A @24Vdc(PMOS) | ||
2A @240Vac(SSR) | ||
Main Card -- Timer / Counter | ||
Channels : 2 | Data length : 32-bit | |
Specific input : trigger in / counter in via digital I/O port0 | Time base : timer @4MHz, counter @33MHz | |
Specific output : trigger out / counter out via digital I/O port 1 | ||
Multi-function : programmable one-shot; square wave generator; event counter; PWM generator | ||
Main Card -- General | ||
Interrupt : from Timer/counter | Operation temperature : 0 to +70 degree C | |
PCI data width : 32-bit | Storage temperature : -20 to +80 degree C | |
Card ID : 4-bit | Operation humidity : 5~95% RH, non-condensing | |
Dimension : 175(W)*120(H) mm, 6.9(W)*4.8(H) in | ||
DIN rail mounted wiring board | ||
JS51026 37PM DIN rail mounted wiring board for AI0 ~ AI7 and DA0 ~ DA7 | ||
Connection cable : D type 37P cable to connect main and wiring board | ||
Dimension : 90(W)*113(L)*60(H) mm, 3.6(W)*4.5(L)*2.4(H) in | ||
JS51053 20PM DIN rail mounted wiring board for JM2 digital I/O | ||
Connection cable : 20-pin flat cable to connect main and wiring board | ||
Dimension : 86(W)*79(L)*52(H) mm, 3.4(W)*3.2(L)*2.1(H) in | ||
ADP9201DIN DIN rail mounted wiring board for JM2 digital I/O | ||
Power Requirement : 24Vdc ± 4Vdc | Input : 8 with LED indicator | |
Output : ADP9201DIN(R) : 8 Relay(3A @250Vac, 3A @30Vdc) with LED indicator | ||
ADP9201DIN(N) : 8 NMOS(Sink 1A @48Vdc) with LED Indicator | ||
ADP9201DIN(P) : 8 PMOS(Source 1A @24Vdc) with LED Indicator | ||
ADP9201DIN(S) : 8 SSR(2A @240Vac) with LED indicator | ||
Connector : One 20-pin male flat cable connector | ||
Operation Temperature : 0 to +70 degree C | Operation Humidity : 5~95% RH, non-condensing | |
Dimension : ADP9201DIN(R) / (N) / (P) : 86(W)*103(L)*45(H) mm, 3.4(W)*4.1(L)*1.8(H) in | ||
ADP9201DIN(S) : 86(W)*103(L)*50(H) mm, 3.4(W)*4.1(L)*2.0(H) in |
Download | ||||||
Driver, DLL, Demo and Example Program | Manual | Catalog | ||||
WinXP/7(32bit) | Win7(64bit) | Win10(32bit) | Win10(64bit) | Hardware Software | Main Card Wiring Board | |
Driver | Driver | Driver | Driver |
Ordering Information | ||
PRODUCT | DESCRIPTIONS | |
1. | AIO3320A | Isolated Analog I/O Card, 8 channels analog input, 8 channels analog output and 16 isolated digital I/O and multi function timer / counter (include bracket kit for digital I/O ) |
2. | AIO3321A | Isolated Analog I/O Card, 8 channels analog input, 16 channels analog output and 16 isolated digital I/O and multi function timer / counter (include bracket kit for digital I/O and AO) |
3. | JS51053 | DIN rail mounted dummy wiring board for JM2 |
4. | ADP9201DIN(R) | DIN rail mounted wiring board with 16 I/O LED indicators and Relay output for 8 DI,8 DO for JM2 |
5. | ADP9201DIN(N) | DIN rail mounted wiring board with 16 I/O LED indicators and NMOS output for 8 DI, 8 DO for JM2 |
6. | ADP9201DIN(P) | DIN rail mounted wiring board with 16 I/O LED indicators and PMOS output for 8 DI, 8 DO for JM2 |
7. | ADP9201DIN(S) | DIN rail mounted wiring board with 16 I/O LED indicators and SSR output for 8 DI, 8 DO for JM2 |
8. | M23207 | 20-pin flat cable 1.5M for ADP9201EK |
9. | M23209 | 20-pin flat cable 3.0M for ADP9201EK |
10. | M232011* | 20-pin flat cable 20cm for ADP9201EK to JM2 |
11. | ADP9201EK* | ADP9201 Extension kit for JM2 |
12. | JS51026 | DIN rail mounted dummy wiring board (D type 37P male to terminals) for JF1 |
13. | M270337X0 | D type 37P male-female cable 1.5M for JF1 |
14. | M270337X0S | D type 37P male-female cable 1.5M, shielding for JF1 |
15. | M270337X2 | D type 37P male-female cable 3.0M for JF1 |
16. | M270337X2S | D type 37P male-female cable 3.0M, shielding for JF1 |
17. | JS51050 | DIN rail mounted dummy wiring board (D type 25P male to terminals ) for JM1(AIO3321A only) |
18. | M270325X4 | D type 25P male-female cable 1.5M for SM23404 (AIO3321A only) |
19. | M270325X4S | D type 25P male-female cable 1.5M, shielding for SM23404 (AIO3321A only) |
20. | M270325X0 | D type 25P male-female cable 3.0M for SM23404 (AIO3321A only) |
21. | M270325X0S | D type 25P male-female cable 3.0M, shielding for SM23404 (AIO3321A only) |
22. | SM23404* | Extension kit for JM1 (bracket and flat cable for 25P female D type connector) (AIO3321A only) |