Applications | ||
Analog Input Section : For measurement of analog signal such as : temperature; voltage; current; flow; light ... | ||
Note : The analog signal should be pre-processed to the acceptable range of the card. | ||
Analog Output Section : For control or signal generation such as : inverter speed; servo motor speed; wave generation; valve control; light control... | ||
Digital Section : For the control of digital i/o : switch input; relay control; trigger output...... | ||
Features | ||
On board Analog and digital I/O over voltage/ current protection | ||
32 channels 12/16-bit Analog input | single end or differential analog input | |
Software selectable input range : 0 ~ 5V, 0 ~ 10V, -5 ~ +5V, -10 ~ +10V | ||
End of conversion interrupt | 2 channel 12/16-bit analog output | |
Output range : -10 ~ +10V | 2 port TTL digital I/O channels | |
Programmable digital filter at 100Hz, 200Hz, 1KHz and no de-bounce for input | ||
No output transition during start-up | Output status read back | |
External triggered interrupt(on IO07 ~ IO00) | 32-bit timer with cross zero interrupt | |
Specifications (With Matched Wiring Board) | ||
Main Card -- Analog Input | ||
Input Channel : 32 channel single end or 16 channels differential | ||
Resolution : 12-bit (AIO3315),16-bit (AIO3315A) | Input Range : 0 ~ 5V, 0 ~ 10V, -5 ~ +5V, -10 ~ +10V | |
Input Impedance : 42K ohm(unipolar) | Integral linearity error : -1 ~ +1 LSB(max)(AIO3315) ,-3 ~ +3 LSB(max)(AIO3315A) | |
31K ohm (bipolar) | Conversion speed : 10us per channel | |
Full scale error : Bipolar -0.45% ~ +0.45%(max) (AIO3315), -0.4% ~ +0.4%(max)(AIO3315A) | Zero error : Bipolar -9 ~ +9 LSB(max) (AIO3315), Bipolar -28 ~ +28 LSB(max)(AIO3315A) | |
Unipolar -0.75% ~ +0.75%(max) | Unipolar -6 ~ +6 LSB(max) (AIO3315), Unipolar-25 ~ +25 LSB(max)(AIO3315A) | |
On board analog input protection : -24V ~ +24V 50mA | ||
Main Card -- Analog Output | ||
Output channel : 2 | Range : -10 ~ +10V | |
Resolution : 12-bit (AIO3315),16-bit (AIO3315A) | Conversion time : < 1us | |
Integral linearity error : -4 ~ +4 LSB(max) | Differential linearity error : -0.5 ~ +0.5 LSB(max) | |
Zero error : 9 LSB(max) | Offset error : 9 LSB(max) | |
Full scale error : -0.7% ~ +0.7%(max) | On board analog output protection : 50mA | |
Main Card -- TTL I/O | ||
IO Channels : 16(max) TTL level | Interrupt at IO00 ~ IO07 | |
On board input protection : 24V 50mA | Output source : 35mA(peak) per channel | |
Output Sink : 35mA(peak) per channel | On board IO channel protection : -24V ~ +24V 50mA | |
Main Card -- Timer | ||
Channels : 1 | Data length : 32-bit | |
Time Base : @1MHz | ||
Main Card -- General | ||
Interrupt : from TTL port0 or Timer/counter | Card ID : 4-bit | |
Connector : D type 37P connector for analog I/O | Operation temperature : 0 to +70 degree C | |
D type 25P connector for TTL I/O | Storage temperature : -20 to +80 degree C | |
Dimensions : 130(W)*102(H) mm, 5.2(W)*4.1(H) in | Operation humidity : 5~95% RH, non-condensing | |
DIN rail mounted wiring board | ||
JS51026 37PM DIN rail mounted wiring board | ||
Connection cable : D type 37P cable to connect main and wiring board | ||
Dimension : 90(W)*113(L)*60(H) mm, 3.6(W)*4.5(L)*2.4(H) in | ||
JS51050 25PM DIN rail mounted wiring board | ||
Connection cable : D type 25P cable to connect main and wiring board | ||
Dimension : 86(W)*79(L)*52(H) mm, 3.4(W)*3.2(L)*2.1(H) in |
Download | |||||||
Driver, DLL, Demo and Example Program | Manual | Catalog | |||||
WinXP/7(32bit) | Win7(64bit) | Win10(32bit) | Win10(64bit) | Labview | Hardware Software | Main Card Wiring Board | |
Driver | Driver | Driver | Driver |
Ordering Information | ||
PRODUCT | DESCRIPTIONS | |
1. | AIO3315 | 12-bit Analog Multi-IO Card 32 AI 2 AO 16 TTL IO Card (include bracket kit for TTL I/O ) |
2. | AIO3315A | 16-bit Analog Multi-IO Card 32 AI 2 AO 16 TTL IO Card (include bracket kit for TTL I/O ) |
3. | JS51026 | DIN rail mounted dummy wiring board (D type 37P male to terminals) for JF1 |
4. | M270337X0 | D type 37P male-female cable 1.5M for JF1 |
5. | M270337X0S | D type 37P male-female cable 1.5M, shielding for JF1 |
6. | M270337X2 | D type 37P male-female cable 3.0M for JF1 |
7. | M270337X2S | D type 37P male-female cable 3.0M, shielding for JF1 |
8. | JS51050 | DIN rail mounted dummy wiring board (D type 25P male to terminals ) for JM1 TTL I/O |
9. | M270325X4 | D type 25P male-female cable 1.5M for SM23404 |
10. | M270325X4S | D type 25P male-female cable 1.5M, shielding for SM23404 |
11. | M270325X0 | D type 25P male-female cable 3.0M for SM23404 |
12. | M270325X0S | D type 25P male-female cable 3.0M, shielding for SM23404 |
13. | SM23404* | Extension kit for JM1 (bracket and flat cable for 25P female D type connector) |