Applications | |
Analog input section : For measurement of analog signal such as : temperature; voltage; current; flowlight | |
Note : The analog signal should be pre-processed to the acceptable range of the card. | |
Analog output section : For control or signal generation such as : inverter speed; servo motor speed; wave generation; valve control; light control | |
Digital section : For the control of digital i/o : switch input; relay control; trigger output | |
Timer section : event counting; periodic interrupt source; duration counter | |
Features | |
Software programmable Single end 8 channel or differential 4 channel AD input | |
AD Resolution : 12/16-bit | |
Software selectable input range : -10V~ +10V, -5V~ +5V, 0~ +10V, 0~ +5V | |
2 channel DA output for -10~ +10V | |
DA resolution : 13/17-bit | |
8 bit isolated digital input | |
8 bit isolated digital output | |
No output transition during start-up | |
Software debounce : No debounce, 100Hz, 200Hz, 1KHz | |
Keep output state after hot reset (jumper selectable) | |
External triggered interrupt(on IN07 ~ IN00) | |
32-bit timer with zero-crossing interrupt | |
Specifications (With Matched Wiring Board) | |
Main Card -- Analog Input | |
Input Channels : single end 8 channel(max) or differential 4 channel(max) | |
Resolution : 12-bit (AIO6328) /16-bit (AIO6328A) | |
Input Range : 0 ~ 5V, -5V ~ +5V, 0 ~ 10V, -10V ~ +10V | |
Input Impedance : 21K ohm (unipolar), 16K ohm (bipolar) | |
Conversion speed : 10us per channel | |
Integral linearity error : -1~ +1 LSB | |
Zero Error : Bipolar -10~ +10 LSB(max) | |
Unipolar -5~ +5 LSB(max) | |
Gain Error : -10~ +10 LSB(max) | |
Main Card -- Analog Output | |
Output Channel : 2 | |
Resolution : 13-bit (AIO6328) /17-bit (AIO6328A) | |
Range : -10V ~ +10V | |
Capacity : ±10mA(typ) | |
Capacitive load : ≦1000pf | |
Main Card -- Digital I/O | |
I/O channels : isolated 8DI, 8DO | |
Output range : open collector 0 ~ 45Vdc(without wiring board) | |
Sink current : 500mA(peak) per output bit(without wiring board) | |
Switch speed : 20KHz(without wiring board or MOS type output) | |
Output rating : using wiring board ADP9201DIN series | |
3A @250Vac, 30Vdc(Relay) | |
1A @48Vdc(NMOS) | |
1A @24Vdc(PMOS) | |
2A @240Vac(SSR) | |
Main Card -- Timer / Counter | |
Channels : 1 | |
Data length : 32-bit | |
Time Base : timer @1MHz | |
Interrupt : time up interrupt | |
Main Card -- General | |
Card ID : 0 ~ 3 | |
Insulation resistance : 100M Ohm(min) at 1000Vdc | |
Isolation voltage : 2500Vac 1Min(digital block only) | |
Connector : One 20-pin male flat cable connector | |
One slim type 26-pin male flat cable connector | |
Operation temperature : 0 to +70 degree C | |
Storage temperature : -20 to +80 degree C | |
Operation humidity : 5~95% RH, non-condensing | |
Dimensions : 90(W)*96(H) mm, 3.6(W)*3.8(H) in | |
DIN rail mounted wiring board | |
ADP9201DIN DIN rail mounted wiring board for DIO | |
Power Requirement : 24Vdc ± 4Vdc | |
Input : 8 with LED indicator | |
Output : ADP9201DIN(R) : 8 Relay(3A @250Vac, 3A @30Vdc) with LED indicator | |
ADP9201DIN(N) : 8 NMOS(Sink 1A @48Vdc) with LED Indicator | |
ADP9201DIN(P) : 8 PMOS(Source 1A @24Vdc) with LED Indicator | |
ADP9201DIN(S) : 8 SSR(2A @240Vac) with LED indicator | |
Connector : One 20-pin male flat cable connector | |
Operation Temperature : 0 to +70 degree C | |
Operation Humidity : 5~95% RH, non-condensing | |
Dimension : ADP9201DIN(R) / (N) / (P) : 86(W)*103(L)*45(H) mm, 3.4(W)*4.1(L)*1.8(H) in | |
ADP9201DIN(S) : 86(W)*103(L)*50(H) mm, 3.4(W)*4.1(L)*2.0(H) in | |
JS51053 20PM DIN rail mounted wiring board or DIO | |
Connection cable : 20-pin flat cable to connect main and wiring board | |
Dimension : 86(W)*79(L)*52(H) mm, 3.4(W)*3.2(L)*2.1(H) in | |
JS510501 25PF DIN rail mounted wiring board for AD/DA | |
On board Connector : Female D type 25P | |
Dimension : 86(W)*79(L)*52(H)mm, 3.4(W)*3.2(L)*2.1(H) in |
Download | |||||||||
Driver, DLL, Demo and Example Program | 3D Models | Manual | Catalog | ||||||
Winxp/7 (32bit) | Win7 (64bit) | Win10 (32bit) | Win10 (64bit) | ||||||
Ordering Information | ||
PRODUCT | DESCRIPTIONS | |
1. | 12-bit Analog I/O and Digital I/O PCI-104 Module | |
2. | 16-bit Analog I/O and Digital I/O PCI-104 Module | |
3. | DIN rail mounted dummy wiring board for JM1 | |
4. | DIN rail mounted wiring board with 16 I/O LED indicators and Relay output for 8 DI,8 DO for JM1 | |
5. | DIN rail mounted wiring board with 16 I/O LED indicators and NMOS output for 8 DI, 8 DO for JM1 | |
6. | DIN rail mounted wiring board with 16 I/O LED indicators and PMOS output for 8 DI,8 DO for JM1 | |
7. | DIN rail mounted wiring board with 16 I/O LED indicators and SSR output for 8 DI, 8 DO for JM1 | |
8. | 20-pin flat cable 1.5M for JM1 | |
9. | 20-pin flat cable 3.0M for JM1 | |
10. | DIN rail mounted dummy wiring board (D type 25P male to terminals ) for JM2 | |
11. | D type 25P male-female extension cable 1.5M for M23405 | |
12. | D type 25P male-female extension cable 1.5M, shielding for M23405 | |
13. | D type 25P male-female extension cable 3.0M for M23405 | |
14. | D type 25P male-female extension cable 3.0M, shielding for M23405 | |
15. | Extension kit for JM2 (flat cable for 25P male D type connector) (Option) |